Results 1 to 10 of 10

Thread: Another lc-1 and taq cable thread..

  1. #1
    Junior Member
    Join Date
    Aug 2011
    Posts
    12

    Default Another lc-1 and taq cable thread..

    So I followed the tutorial to the T and I'm not getting the led 2 from the left (communication) light blinking. My WB gauge works but for some reason I cannot log the wbo2 pids because I have no communication. My software is up to date. Any suggestions?
    - Ed

  2. #2
    Junior Member
    Join Date
    Aug 2011
    Posts
    12

    Default

    I did notice my flashscan v2 doesnt have "com in" and "com out" settings. It only has "com port" which i changed to "wide-O2".

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which V2 firmware does your V2 have...?

  4. #4
    Junior Member
    Join Date
    Aug 2011
    Posts
    12

    Default

    bootblock version 2.07.03 firmware version 2.07.22

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Did you set wideband type to Innovate...?


    Do you have a null modem cable (from TAQuickness)...?

  6. #6
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    Make sure you have the null plug inserted into the proper port on your Innovate cable. Im pretty sure it goes into the Com In and the Com Out goes to your V2.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    +1 what Erik said...

    the blank stereo plug that comes with the LC-1 is a terminator, this has to be plugged into the LC-1's SERIAL IN.

  8. #8
    New Member
    Join Date
    Nov 2011
    Posts
    3

    Default

    So, did it work for you?

    I have the same Problem.
    Quote Originally Posted by endlink View Post
    I did notice my flashscan v2 doesnt have "com in" and "com out" settings. It only has "com port" which i changed to "wide-O2".

  9. #9
    Junior Member
    Join Date
    Jan 2012
    Posts
    11

    Default

    ttt same problem

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    V2 has a setting for selecting the comms direction (dyno or wideband) and the brand of wideband (e.g. Innovate).

    Also look at post #7.

Similar Threads

  1. Setting up my LC1 using a TAQ Cable
    By blsnelling in forum Gen III V8 Specific
    Replies: 12
    Last Post: October 28th, 2010, 09:02 AM
  2. another emergancy help thread
    By nonnieselman in forum Duramax LB7
    Replies: 17
    Last Post: September 9th, 2009, 01:04 PM
  3. First Thread
    By TAQuickness in forum Custom Operating Systems
    Replies: 3
    Last Post: December 11th, 2005, 06:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •