Results 1 to 2 of 2

Thread: Update autocal firmware and now none of the buttons work

  1. #1
    New Member
    Join Date
    Sep 2011
    Posts
    2

    Default Update autocal firmware and now none of the buttons work

    I had had no trouble with the unit, I went to load my stock tunes back onto my truck to have it retuned for some changes I made, pluged it into the computer and it told me there was an update. I clicked on the update boot block and update firmware in that order and then when it came back on only the down arrow functioned and after unplugging it and plugging it back in now none of them work and it is the same if it is powered by usb or by odb port.

    Any ideas or is the unit toast?

  2. #2
    Lifetime Member
    Join Date
    Jul 2004
    Posts
    640

    Default

    It's not likely toast. You can call you tuner and see if he can help you through loading the firmware again. You can format the config file area and see if the settings are messed up.
    You are also welcome to call me. Contact info can be gleaned from my profile.

    Ira

Similar Threads

  1. scanner buttons work work?
    By pullincrazy88 in forum FlashScan V2
    Replies: 7
    Last Post: May 16th, 2009, 12:12 PM
  2. Trying to update V2 firmware
    By 98ls1blackbird in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: May 4th, 2007, 10:47 AM
  3. Firmware update
    By Extinct in forum FlashScan V2
    Replies: 3
    Last Post: January 14th, 2007, 02:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •