Results 1 to 4 of 4

Thread: 98 to 99 Fuel Segment swap gauge output table

  1. #1
    New Member
    Join Date
    Sep 2011
    Posts
    2

    Default 98 to 99 Fuel Segment swap gauge output table

    I've done a fuel segment swap to run a 99+ PCM in my car. I am trying to get the fuel gauge to work. Question though what are you guys using in the Gauge Output vs Level table and Primary Volume vs Level table? You guys using the 98 table? 99+ table? The express van table? Stumped here

  2. #2
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    There are more than a few threads on upgrading from an LS1-A PCM to and LS1-B PCM. Perhaps try a search of the Forum ... probably what you need is already here.

    Below is one of the threads I found using the search function ...

    http://forum.efilive.com/showthread....ght=fuel+gauge


    Regards,
    Taz

  3. #3
    New Member
    Join Date
    Sep 2011
    Posts
    2

    Default

    Quote Originally Posted by Taz View Post
    There are more than a few threads on upgrading from an LS1-A PCM to and LS1-B PCM. Perhaps try a search of the Forum ... probably what you need is already here.

    Below is one of the threads I found using the search function ...

    http://forum.efilive.com/showthread....ght=fuel+gauge


    Regards,
    Taz
    Actually that information you posted I have already done and isn't even the topic of my post.

    Thanks again

  4. #4
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    The point of my post was to take a look for the material yourself ... often faster than waiting for someone to post up.

    You are welcome by the way ...


    Regards,
    Taz

    EDIT: Received your message - only the moderator (Joecar) can lock threads ... I was trying to be helpful ... unfortunate that you seemed to have misinterpreted this ...

Similar Threads

  1. How do you do a segment swap?
    By Redline Motorsports in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 29
    Last Post: July 8th, 2012, 07:18 AM
  2. 06 LLY Fuel Gauge - empty gauge with 7 gallons left
    By timvan in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: December 5th, 2009, 01:35 PM
  3. Help Doing Fuel Segment Swap for my 98 to 00 PCM Conversion
    By edwardzracing in forum Gen III V8 Specific
    Replies: 10
    Last Post: May 25th, 2009, 04:09 AM
  4. 98 to 99+ fuel system segment swap.
    By waterbug1999 in forum Gen III V8 Specific
    Replies: 25
    Last Post: October 8th, 2008, 08:21 AM
  5. 98 to 02 swap fuel gauge mess
    By zapp168 in forum Gen III V8 Specific
    Replies: 11
    Last Post: June 4th, 2007, 11:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •