Results 1 to 2 of 2

Thread: transmission swap

  1. #1
    New Member
    Join Date
    Sep 2011
    Posts
    1

    Default transmission swap

    Is it possible to program 1998 L31 Vortec pcm from 4L80E to a 4L60E transmission with EFI Live soft ware. Have V2 flashscan software, new user used to different software for German cars. Thanks for any input.

  2. #2
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Hello Autohouse,

    The 1998-2000 Vortec "black box" PCMs are supported by EFILive software. If you have an existing 1998 tune from a 5.7 L and 4L80 vehicle, you will also need to obtain a 1998 tune with the same OS (operating system) equipped with a 4L60 - and then use the "Copy entire segment" function to import or swap the transmission calibration segment and transmission diagnostic segment.

    Check out the Tune File Depot website ... www.tunefiledepot.com for the tune that you require.

    While you are at it ... it maybe worth while to upgrade to an LS1-B PCM ... often referred to as an "0411 swap".


    Regards,
    Taz

Similar Threads

  1. 12579405 5 speed for transmission segment swap?
    By ELake20 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 27th, 2011, 11:56 AM
  2. Transmission control
    By limited cv8r in forum Gen IV V8 Specific
    Replies: 14
    Last Post: May 5th, 2009, 01:11 PM
  3. Transmission swap in E38/E67 vehicle.
    By XLR8NSS in forum Gen IV V8 Specific
    Replies: 24
    Last Post: February 2nd, 2009, 09:04 AM
  4. Transmission callibrations
    By kmidkiff in forum Gen III V8 Specific
    Replies: 2
    Last Post: October 9th, 2008, 06:35 AM
  5. Allison transmission
    By Whippled 496 in forum Duramax LB7
    Replies: 1
    Last Post: September 25th, 2006, 06:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •