Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Newb Setting up serial Wide band

  1. #1
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default Newb Setting up serial Wide band

    So Im totally new at this and was wondering how do i go about setting up my new serial wide band sensor for inovate to work with EFIlive

    For doing my Auto VE

    I see some information in here

    http://download.efilive.com/Tutorial...20Tutorial.pdf

    But im wondering if its different for the serial wide band?

    This is the sensor i have

    http://www.amazon.com/Innovate-Motor...=2QJYGDN3NXT1S


    Thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi HKH welcome to the forum

    Which year/model/vehicle do you have...?

    Setting up V2 for serial wideband data from LC-1:
    Quote Originally Posted by joecar View Post
    V2 serial/digital wideband logging:
    showthread.php?t=8858
    showthread.php?t=8115
    showthread.php?t=10251 post #2

    V2 serial/digital AFR input (LC-1):
    showthread.php?t=8115
    showthread.php?t=7532
    showthread.php?t=8348
    showthread.php?t=9340 post #3

    . . .

    LC-1 free air calibration from V2:
    showthread.php?p=93571#post93571

    Some tuning methods (look at how Lambda is used instead of AFR):
    A-New-Twist-on-CALC.-VE-Table..Computing-the-Entire-VE-Table.
    Calculating-MAF-Airflow-From-VE-Table..CALC-VET-In-Reverse
    Last edited by joecar; October 14th, 2011 at 02:55 AM.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    If you want to do the AutoVE tutorial, use Lambda instead of AFR for the BEN (the Calc.VET tutorial has a calc_pids.txt file)...

    i.e. define the BEN to be {GM.EQIVRATIO}*{EXT.WO2LAM1}

    look at WO2BEN (CLC-00-110) in this calc_pids.txt file (from the Calc.VET tutorial): calc_pids.txt

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Also, you might want this:

    Configuring V2 for BBL/BBF :
    Quote Originally Posted by joecar View Post
    showthread.php?14351-BBL-PIDs-V2
    showthread.php?13841-What-is-BBL
    showthread.php?13836-New-V2-help-find-exlporer
    showthread.php?15492-V2-BBL-saving-log-data

  5. #5
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    Thanks for the quick response ill see what i can figure out...

    I have a 1997 chevy k1500

    383

    The parts list...
    180-High Flow T-Stat
    Magna core Spark Plug wires
    BBK 82mm LS1 Throttle body
    Marine intake Extensively ported and polished gasket matched.... no barbs or rough edges here.
    45 lbs injectors.... not ordered yet
    Patriot 185cc heads 64cc combustion chamber...
    - ported
    - polished
    - gasket matched
    - Combustion chamber ported and polished
    - Stainless steel Valves 2.02 intake 1.60 exhaust

    Comp Gold Roller Rockers 1.6 ratio
    ARP thick wall push rods
    Guide plates


    Custom Comp Cam

    Intake
    224 Duration
    573 lift

    Exhaust
    230 Duration
    568 lift

    Lobe separation of
    113

    Part number
    08-000-8 Grind CS3015/3036HR113+4

    Scat rotating assembly 400 crank
    Scat Connector rods 6"
    Keith Black Pistons
    -Heat Shield Coated
    -Skirts Friction Coated

    2 bar map sensor

  6. #6
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    So ordered that Wide band mentioned above and its no longer avaliable... discontinued....


    What is the reccomended serial wide band sensor?

  7. #7
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    So im looking at this one

    Innovate Motorsports 3844 MTX-L Complete All-In-One Air/Fuel Ratio Gauge Kit

    But ill order what ever you see to be the best avaliable.

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    The Innovate MTX works just like the LC-1/LM-1/LM-2... it uses the same serial comms protocol so FlashScan V2 can talk to it, no problems.

  9. #9
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    So in order to get the LC-1 to hook up to the Flash and Scan V2.... for logging purposes.... What do i need to do pin out wise.... I dont want to use it as an analog..

    Do i need to get another serial cable and splice it up...? Then put some leads into the Flash and scan?

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    The quickest easiest thing to do is to order an LM-2 cable from here (check with him that this is the right cable for the MTX): http://taquickness.com/taqcables.htm

Page 1 of 3 123 LastLast

Similar Threads

  1. Wide band
    By Harrismarine in forum FlashScan V2
    Replies: 0
    Last Post: July 6th, 2008, 11:27 AM
  2. Help with wide band hookup
    By Bob's Garage in forum Gen IV V8 Specific
    Replies: 16
    Last Post: September 9th, 2007, 04:47 AM
  3. The Wide Band....how do we really know...
    By Redline Motorsports in forum General
    Replies: 19
    Last Post: January 8th, 2007, 05:51 AM
  4. wide band o2
    By woody69 in forum Custom Operating Systems
    Replies: 11
    Last Post: October 23rd, 2006, 03:19 PM
  5. lm-1 wide band
    By 69camaro5speed in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: January 6th, 2006, 07:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •