Results 1 to 7 of 7

Thread: Data Logging Help

  1. #1
    New Member
    Join Date
    Oct 2011
    Posts
    4

    Default Data Logging Help

    I have searched all over and not found a direct answer to what I am looking for. I am trying to see my logged (recorded) information in the dashboard, but none of it is shown when I play it back. I have the pid's for fuel selected and validated, but i don't see anything going on in the graph or in the dashboard for it. I am extremely new to this, maybe I am just over looking something.

  2. #2
    Junior Member
    Join Date
    Sep 2011
    Posts
    30

    Default

    I need some help with this also.
    06,QC,4X4-ARE top, Bedslide ,EFILive tuned my me and Anarchy, FASS, DTT, ATS 5000 twins, PDR cam, BD IC, Carli/Thuren, Warn Air/Winch, F1 Springs, Studs
    01,QC,4X4-Banks PowerPack, RV275s,PDR35/14, FASS, Carli/Thuren/Lorenz, OnBoard Air, DTT, ARB/Warn

  3. #3
    Lifetime Member AdamRRT's Avatar
    Join Date
    Jun 2011
    Posts
    221

    Default

    Just one part - Be sure you've got the same PIDs selected in dashboard that you were monitoring while recording.
    Now I'll step aside as that's the limit to my knowledge in reference to the info you've offered.
    EFI Live, Maxxed Out auto trans, Edge TC, FASS, 35's, 4" lift, E.D. 62/68/12, 70 hp tips.

  4. #4
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Do you see the logged data in the [Data (F9)] tab page?

    If the data is there, then (as AdamRRT said) it is likely that the charts and gauges are not set with the same PID names.
    You can right-click on a gauge and select "Gauge Properties" to select the PID (parameter) that you want it to display.
    You can right-click on a chart series title and select "Chart Properties" to select the PID (parameter) that you want it to display.

    Regards
    Paul
    Before asking for help, please read this.

  5. #5
    New Member
    Join Date
    Oct 2011
    Posts
    4

    Default

    let me try that to be sure, i may be back! thank you all very much!

  6. #6
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    517

    Default

    When you record, are you clicking the red button or the yellow button?

  7. #7
    New Member
    Join Date
    Oct 2011
    Posts
    4

    Default

    no, i got the recording down lmao i understand the difference in the yellow and red. i also have the data in the data tab, i tried changing the gauges and it seems to be working alright now! thank you all! i really just dont know enough about this to do very good! my friend has been doin the tuning for me lol but we need the data logging to see whats goin on with the truck. what do you guys recomend changing first to try and get a tune equivalent to maybe a smarty or something? is it pretty hard to get that far with it or what?

Similar Threads

  1. BB Logging - Missing Data ?
    By Ninety8C5 in forum FlashScan V2 BB Logging
    Replies: 30
    Last Post: July 24th, 2009, 12:01 PM
  2. V1 Data logging
    By Harrismarine in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: December 2nd, 2007, 06:01 PM
  3. Data logging a 98
    By minytrker in forum General
    Replies: 2
    Last Post: February 25th, 2006, 01:10 PM
  4. Data logging
    By never satisfied in forum Duramax LB7
    Replies: 1
    Last Post: February 20th, 2006, 01:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •