Results 1 to 8 of 8

Thread: Tuning 6.0l for efficiency

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    May 2011
    Posts
    3

    Default

    thanks for the heads up. I know that this truck is not going to be any economical vehicle of any sort. I am playing with the DFCO lightly. Is there anything I can do with fuel/air, timing or transmission tuning to help out econ?

  2. #2
    Member
    Join Date
    Nov 2014
    Posts
    55

    Default

    Quote Originally Posted by wildbillracin View Post
    thanks for the heads up. I know that this truck is not going to be any economical vehicle of any sort. I am playing with the DFCO lightly. Is there anything I can do with fuel/air, timing or transmission tuning to help out econ?
    Right now I am on a 6.0L 4l65e in a denali so similar in some respects.
    I have found that the transmission tuning and torque management decrease really makes things come alive and feel so much better. I figure when it requires less throttle input to feel like I am going the same speed I normally see mpg increase. I have yet to check and see if there is a real world increase from the trans tuning yet since I am onto the fuel and timing right now but I feel it had to have helped!

    Look at Joecars input on the top of the trans tuning section and it really helps out (he has helped me a ton with mine!)

Similar Threads

  1. 08 Silverado 5.3 Tuning, tuning-spark/pe mode/
    By hulm333 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: November 16th, 2009, 04:44 PM
  2. what parameters need to be met to run Idle Catalyst Efficiency Test?
    By skneeland in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 25th, 2009, 02:58 AM
  3. Volumetric Efficiency PID
    By mnotx in forum General
    Replies: 20
    Last Post: November 29th, 2006, 05:18 AM
  4. idle fuel efficiency?
    By turboberserker in forum Custom Operating Systems
    Replies: 3
    Last Post: February 16th, 2006, 07:13 PM
  5. Base Efficiency Numerator 1-LM-1
    By curtbriggs in forum General
    Replies: 2
    Last Post: September 4th, 2005, 03:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •