Silver Bullet Tuning makes 625hp smoke free.

[someguy]

How many crank degees is 3000 uSec and what is the limit if you have enough CP3 ?

How much fuel can you deliver (per stroke) with a stock fuel system ?

Thanks

[DODGE74]

Good luck with this question, I also asked this question on another forum with no responces.


Trust me, I would like to know myself. I know where some of the box tuners stop but I would still like to know if there is a limit.

[2007 5.9]

How many crank degees is 3000 uSec and what is the limit if you have enough CP3 ?

How much fuel can you deliver (per stroke) with a stock fuel system ?

Thanks

3000uS at what rpm?? Rpm determines CAD.

I've ran as high as 3300uS but that's it.

Stock usually fuel 125-140mm3 in my findings.

Our puller maxes at 160mm3 at 903hp

[DODGE74]

3000uS at what rpm?? Rpm determines CAD.

I've ran as high as 3300uS but that's it.

Stock usually fuel 125-140mm3 in my findings.

Our puller maxes at 160mm3 at 903hp

Thanks Les,

this makes me feel more comfortable where I'm at but what do you mean CAD?

[2007 5.9]

Thanks Les,

this makes me feel more comfortable where I'm at but what do you mean CAD?

CAD=Crank Angle Degrees

[AdamRRT]

But you're changing the value of mm3. Easier to just say it can maintain x pressure at z duration since my 120mm3 is different from your 120mm3. Make sense? Pressure and duration don't change their values. 1 MPa and 1uS are always that. But we change what 1mm3 is referring to.

Not that I know the answer. I just know that mm3 is a reference not a measurement, in our usage.

That is, unless you're saying that's with bone stock pressure and duration tables.

[olboyowl]

i run just shy of 3100us at 140mm3 with a very slight haze and the needle is just hitting 1500* for egts. just trying to help by throwin some more #'s out there.

[2007 5.9]

This particular truck makes 625hp on a 3100uS at 160Mpa with 25* timing and can kiss 1500* around 110mph.

[olboyowl]

wonder who aided me in that set up... thanks again les. im no where near that hp though. however, i did pull a new 6.7 scorpion earlier today pretty bad. had to let off to stay out of his rear bumper. still had the dealer papers on the window. guy waved/thumbs up when he got off the exit. at least now i can say im probably over 400hp.

[DODGE74]

This particular truck makes 625hp on a 3100uS at 160Mpa with 25* timing and can kiss 1500* around 110mph.

Les, would you care to tell us the mods that are done to this truck?