Results 1 to 10 of 11

Thread: AFR Commanded... Where else other than PE???

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Behold's Avatar
    Join Date
    Apr 2010
    Posts
    155

    Default

    I see my problem. my B3647 table is not the same in my SD tune and my VE tune...

    Question is should I use my stock B3647 table or the VE tune version? in PE mode its only gonna overide it as its richer??
    -----------------------------------------------------------------------------------------
    Thanks Antony

    Holden Commodore GTS - LS1 5.7
    12 rib Crank Driven Vortech V2 Centri Charger (Intercooled) 9 PSI.
    LS6 Intake
    LS6 Heads
    YT 1.7 Roller Rockers
    BTR Dual Spring with Ti retainers
    BTR Hardend 7.400 Push rods
    Comp Cam JAMCAM
    2 Bar Map
    Mafless
    LS2 Coils

    PCM LS1B with 512KB Running COS5 v01290005

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    CL: B3618 will command fuel.

    OL: the richer of B3647 and B3618 will command fuel.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Set the fueling units to EQR as this will make understanding easier and helps to avoid mistakes...


    [ if you want, make a post-it note cheat-sheet converting a few EQR's to AFR ]

Similar Threads

  1. Commanded AFR not equal to WBo2 AFR at idle.
    By macca33 in forum Gen III V8 Specific
    Replies: 34
    Last Post: April 6th, 2012, 12:56 PM
  2. Commanded AFR going out of spec
    By Highlander in forum E37, E38 & E67 PFI ECM's
    Replies: 26
    Last Post: December 28th, 2009, 03:54 PM
  3. Cold AFR doesn't follow commanded AFR
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 29
    Last Post: August 17th, 2009, 02:50 PM
  4. “Un-commanded” AFR at WOT
    By Rontune in forum Gen III V8 Specific
    Replies: 13
    Last Post: July 3rd, 2009, 02:58 PM
  5. commanded afr
    By 69camaro5speed in forum General
    Replies: 3
    Last Post: December 29th, 2005, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •