17:15:22.184: ECM seed is: $9C75
17:15:22.185: Unlock attempt 1 of 1
17:15:22.306: Initializing ECM...
17:15:23.621: Error: Failed. Controller has returned to normal operation, please retry the operation.
17:15:24.246: Total time: 00:00
17:15:24.249: Rebooting ECM... (please wait up to 8 seconds)
17:15:25.397: ECM has booted successfully...
17:15:26.400: Clear emisison related DTCs...
17:15:26.429: Clear DTCs for all modules...
17:15:28.492: Autodetect interface ...
17:15:28.769: Interface firmware version: 2.7.22
17:15:28.770: Connection to [FSV2] interface is OK
17:15:28.771: Autodetect ECM...
17:15:28.797: Connection to ECM is OK
17:15:30.126: Disconnecting ...
17:15:30.696: CAN-VPW Bridge Deactivated
17:15:30.697: Disconnected
17:15:35.278: Done!
i have an 08 LMM and this error keeps coming up when I try to read my ecm.. and also can not flash!... but v8 works for some reason? i was able to tune with v8 and i would rather use v7.5.. i tried unplugging the radio fuse and info.. same error.. whats the deal?/