Im using techedge w02 new sensor and calibration has been done, I have tried with both analog and comport connections but getting a massive error between what techedge display and what the v2 and dashboard show.The dashboard shows the lambda at .613 or 9.04 afr while the techedge display shows 11.0 afr.If I tune to v2 mixtures a extremely lean.Dose the a/d port cal affect the comp port output.V2 firmware is 2.7.22.V7.5.7 [180 build].The techedge display is showing slightly richer than the engine 02 sensors.