I have a 2011 Camaro SS. It has a cold air intake, a cam, headers and high flow cats installed. I have followed Swingtan's E38 VVE how to, and will post a log that I took yesterday. It seems to be really rich down low, and pretty lean up high when running in the configuration that you use for tuning the VVE. This seems pretty logical based on the mods that have been done. When running on the MAF it seems to be pretty close, around 12.8AFR under WOT conditions. I'm guessing they just tweaked it in using the MAF freq adjustments and never messed with the VVE tables. After taking the log I'm confused on the correct map to use when logging. I have a serial LC-1 WO2 installed. I think where I need help is the map creation in the scan tool. I tried using the E38 BEN map, but when I copied and pasted it it looked nothing like the example in Swingtan's how to. Could someone look at my tune and log and help me get this baby dialed in?

Thanks Guys,
Jay

E38_VVE_Adjust_01.tunLog_Jay_VVE_01.efi