I have done autoVE over the past few days and got it to a stage where i could upgrade my program to the new OS3 and setup all the other tables.

It all worked fine. I now have a duel spark table, lean cruise enabled, PE at 95% and stoic to 75MAP then blending to similar to PE. I may as well turn PE off.

I have even enabled IAT correction from data i collected while building the new VE table and i have it at about 1% correction every 10 deg.

At the moment i have my desired spark table 3 deg above the lower one. I will trim them both together for a while keeping a 3 deg gap and then aim to pump up the hioctane table in cooler conditions.

How do i set the amount of knock needed to learn either way with the spark tables. I would also like to plan how i can setup a table for ethanol fuel as well.

Having some trouble with surging - have played a little with the timing correction of hi and low idle. But i think the issue is with idle air or something else.

My VE table is not ideal near 400-800 i wish there was a 600 row as well !

Great work Blacky and GMPX its a sweet and powerful package you have created.