Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: 48RE Parameters

  1. #1
    Senior Member TexasCummins's Avatar
    Join Date
    Jul 2011
    Posts
    143

    Default 48RE Parameters

    If I wanted to see governor pressure when in tow/haul mode, which table would I look at? There's normal (B4524), full throttle (B4526) and low range (B4522).
    EFI Live - The Smarter way to tune!
    2006 Ram 2500 4x4

  2. #2
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    I recommend using the TTVA table, make very small changes. A couple *s can make a large difference.
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  3. #3
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    Quote Originally Posted by TexasCummins View Post
    If I wanted to see governor pressure when in tow/haul mode, which table would I look at? There's normal (B4524), full throttle (B4526) and low range (B4522).
    Normal...
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  4. #4
    Senior Member TexasCummins's Avatar
    Join Date
    Jul 2011
    Posts
    143

    Default

    Another question I have is for the beta testers - have any of y'all tuned the transmission to drive and shift nicer with larger than stock tires?
    EFI Live - The Smarter way to tune!
    2006 Ram 2500 4x4

  5. #5
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    As far as what?? Delayed shifts...firmness etc...
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  6. #6
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    By far my friend...bump the shifts up with TTVA, lock/unlock control on the TC has really made the truck drive-able...That 3-4 shift with lockup at say 50mph with a 87% throttle kickdown are things of the past...the 48 is very very nice to drive now. Efilive has once again raised the bar on everything.
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  7. #7
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    my customers running large chargers have greatly benefited from being able to stay on top of them.
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  8. #8
    Senior Member TexasCummins's Avatar
    Join Date
    Jul 2011
    Posts
    143

    Default

    Less TPS% for downshifts, firmness... with my 35's and 3.73's it lugs down horribly in fourth with the TCC locked between 50-65mph. For normal driving around town a little less pedal to downshift and get going would help.
    EFI Live - The Smarter way to tune!
    2006 Ram 2500 4x4

  9. #9
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    The TPS for kickdown is in the parameters section i believe
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/

  10. #10
    Senior Member
    Join Date
    Jul 2011
    Posts
    128

    Default

    just when i thought the truck was at its limits, efilive goes and releases this...thanks to the efilive crew and beta testers for the early christmas gift. now if i can figure out what half of this stuff means. i'll have to watch what others are doing/recommending as this is not a strong point for me. thanks again to all involved.

Page 1 of 3 123 LastLast

Similar Threads

  1. Idle Parameters
    By Highlander in forum IL4, 97-01 PCM and 02+ P11 PCM
    Replies: 3
    Last Post: November 22nd, 2009, 05:18 PM
  2. New A6 Parameters
    By gmh308 in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 4
    Last Post: March 15th, 2009, 07:33 PM
  3. What parameters can a RR tune?
    By N0DIH in forum RoadRunner Real-Time PCM Emulator
    Replies: 18
    Last Post: March 7th, 2008, 03:20 AM
  4. Any one know what parameters....
    By 98SS2836 in forum Gen III V8 Specific
    Replies: 0
    Last Post: January 16th, 2007, 04:01 AM
  5. outside parameters
    By wkdivr in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 6th, 2005, 01:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •