Results 1 to 2 of 2

Thread: VE a6 to m6 conversion help

  1. #1
    Member
    Join Date
    Aug 2006
    Posts
    90

    Default VE a6 to m6 conversion help

    Hi Guys , trying to get a customers vehicle runing he has changed it from a6 to m6 and has changed the loom to a manual loom etc i have found a manual tune to use with the same operating system as his old auto tune (which i had tuned prevous) v2 will not conmunicate thu the ob2 port and has a heap of fault codes on dash but when doing a vehicle scan for can - bus (with other scan tool) it can't find the ecm , auto trans etc so i removed the ecm and flashed a manual tune in to on the bench but still no go i'm guess it has a break in the can-bus network some where are the manual wiring looms different from year to year? my operating system number is 12635863

  2. #2
    Junior Member
    Join Date
    Jun 2011
    Posts
    19

    Default

    How did you go with this??

Similar Threads

  1. Please help with LS2 conversion
    By jasonsfbodies in forum Gen IV V8 Specific
    Replies: 21
    Last Post: August 3rd, 2010, 12:42 AM
  2. Inline-6 Conversion ??
    By Lennart in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: January 17th, 2009, 09:48 PM
  3. E-85 Conversion
    By vatman02 in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: May 26th, 2008, 01:53 AM
  4. another 00 to 02 conversion question
    By DaddySS in forum Gen III V8 Specific
    Replies: 5
    Last Post: September 6th, 2007, 03:04 PM
  5. 99 to 02 conversion parameter
    By DaddySS in forum Gen III V8 Specific
    Replies: 7
    Last Post: September 2nd, 2007, 09:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •