Results 1 to 3 of 3

Thread: Read option for E35A and E35B in V8 Tune section.

  1. #1
    Lifetime Member
    Join Date
    Apr 2008
    Posts
    269

    Default Read option for E35A and E35B in V8 Tune section.

    I had a question as to why in the current public V8 release in the Scan And Tune App. Under F3: Tune > F2 Read there is a button at the bottom called Config. Open it and under Tuning Tool > Warnings there is some boxes that one can check for E35A and E35B for Read. Of course this disables any warning messages. What would be wrong just reading these ECMs? What can go wrong? I thought reading caused no issues?

    Brian
    2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White.
    With the LMM Duramax 365hp/660tq, MW7 Allison 1000 6-speed
    EFILive LMM DSP5 Settings, 500HP, 450HP, 400HP,Tow with Turbine Brake, and Stock HP.

    UA Steamfitter, Local 136 Evansville, IN - Remember if you want to play you got to pay.

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    The warnings are not in the RC7 for V8, however I suspect in the earlier versions it was something to do with the Bosch ECM's being restricted in reading certain parts of the ECM, this is fixed in the current RC7.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member
    Join Date
    Apr 2008
    Posts
    269

    Default

    Ok just was wondering why and I can see why now. Thanks

    Brian
    2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White.
    With the LMM Duramax 365hp/660tq, MW7 Allison 1000 6-speed
    EFILive LMM DSP5 Settings, 500HP, 450HP, 400HP,Tow with Turbine Brake, and Stock HP.

    UA Steamfitter, Local 136 Evansville, IN - Remember if you want to play you got to pay.

Similar Threads

  1. can someone read this tune
    By c2500dmax in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: July 28th, 2011, 09:06 AM
  2. E35A or E35B
    By billdmax in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: March 14th, 2011, 12:16 PM
  3. '09.5' G8 tune...can't read?
    By hquick in forum Gen IV V8 Specific
    Replies: 4
    Last Post: January 26th, 2008, 04:05 AM
  4. So can I read and tune....
    By 98SS2836 in forum Vortec V6/V8 Specific
    Replies: 4
    Last Post: March 30th, 2007, 12:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •