Results 1 to 2 of 2

Thread: FCA and Wastegate

  1. #1
    Junior Member
    Join Date
    Sep 2011
    Posts
    15

    Default FCA and Wastegate

    I am logging FCA% Commanded and actual. I am not understanding what the percentages mean and what causes the difference. Second I have been searching and still unclear what the Duty Cycle is in relation to the wastegate on the turbo. I dont understand when the minimum or Max Duty cycle would be used. I have read the definations in the tune tool. I am sure its simple....Im just not grasping it.

  2. #2
    Lifetime Member dansdieselp's Avatar
    Join Date
    Apr 2009
    Posts
    600

    Default

    For the FCA the higher the Commanded % duty cycle the higher the pressure and flow. Same goes for the wastegate DC. Most set the max to 100% and raise the minimum up until they achieve the boost they desire.
    Dan's Diesel Performance
    Specializing in Duramax and Cummins Diesels
    Building and tuning trucks from daily drivers to full out competition

    www.dansdieselperformance.com

Similar Threads

  1. FCA duty cycle questions.
    By DODGE74 in forum Cummins 5.9L
    Replies: 17
    Last Post: August 11th, 2013, 02:41 AM
  2. Tuning Around Wastegate Solenoid?
    By 2006Cummins in forum Cummins 5.9L
    Replies: 6
    Last Post: March 29th, 2012, 02:31 AM
  3. FCA Current Conversion
    By FUBAR in forum Cummins 5.9L
    Replies: 0
    Last Post: January 21st, 2012, 03:06 PM
  4. FCA surge
    By icemanjc1 in forum Cummins 5.9L
    Replies: 2
    Last Post: October 21st, 2011, 11:02 AM
  5. Wastegate Issue
    By TexasCummins in forum Cummins 5.9L
    Replies: 12
    Last Post: September 24th, 2011, 01:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •