Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Unable to get into systems with V2

  1. #1
    Junior Member Mayhem's Avatar
    Join Date
    May 2011
    Posts
    27

    Default Unable to get into systems with V2

    Hi, Im' posting for a friend who just fitted an LS2 with E68 ECU into a Wrangler. He just got V2 and cannot get into the systems to adjust fan on/off temps, actualy unable to get into systems at all. Dose anyone have any idead why?

    Dennis

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Dennis, E68 doesn't exist. Maybe an E40?
    When you say he can't get in, do you mean he can't read the tune out or can't communicate with the ECM at all?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member Mayhem's Avatar
    Join Date
    May 2011
    Posts
    27

    Default

    Hi GMPX, thanks for your reply. The ECU is a E67 not E68. This is a GM performance ECU.
    He can open the engine calibration,engine diagnostic etc. but not the systems file where the security, fan etc. controls are.

    Dennis
    Last edited by Mayhem; January 9th, 2012 at 10:29 PM.

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    ok, that makes a little more sense.
    The GMPP ECM is a unique application, there is no security for starters, I'm not even sure how the fans are done on them, is it controlled by the ECM?
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Junior Member Mayhem's Avatar
    Join Date
    May 2011
    Posts
    27

    Default

    The fans are controled by the ECU and come on to late. He is probably going to have to opperate them externaly to get them to come on sooner ?

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    It might be like the normal production E67's where we rescaled the fan operating temp table so you could lower the turn on temp below 89degC. Before he adds an external controller let me check it out. So you know if the fans are just simple relays (low & high speed), or PWM variable speed fans?
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Junior Member Mayhem's Avatar
    Join Date
    May 2011
    Posts
    27

    Default

    There is only one fan connected (no space for 2) and connected via a relay only on and off not 2 speed.

    Thanks for your help
    Dennis

  8. #8
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Is the OS in the ECM 19211212?
    Looks like they are set to turn on around 99 degC, does that sound about right?
    I no longer monitor the forum, please either post your question or create a support ticket.

  9. #9
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Dennis, here's something for you guys to try.
    Attached to this post is a revised .calz file, this defines what maps you can see in the tune, I've added the fan table in there for E67 OS 19211212 (which I assume is what the GMPP ECM is using), please let me know if it's something else.
    Anyway, download the zip and extract the 19211212.calz file in to the folder:

    Program Files\EFILive\V7.5\Calibrations\E67

    Once done, re-open the tune (no need to re-read the ECM, just load the file off the PC) and you should see the Fan table in the system segment.

    Cheers,
    Ross
    Attached Files Attached Files
    I no longer monitor the forum, please either post your question or create a support ticket.

  10. #10
    Junior Member Mayhem's Avatar
    Join Date
    May 2011
    Posts
    27

    Default

    Thanks for your help, we realy appresiate the help. The OS is correct so will try to load it later and will keep you posted.

    Regards
    Dennis

Page 1 of 2 12 LastLast

Similar Threads

  1. how to change OS systems
    By nchristian in forum Gen III V8 Specific
    Replies: 1
    Last Post: July 29th, 2010, 09:41 PM
  2. Operating systems
    By petestoy in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 14
    Last Post: January 18th, 2008, 09:03 AM
  3. different operating systems?????
    By wallsjay in forum Gen III V8 Specific
    Replies: 1
    Last Post: October 31st, 2007, 03:36 PM
  4. Removing non used systems
    By allanffr in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: August 4th, 2007, 09:12 AM
  5. Question about new custom operating systems
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: August 25th, 2005, 10:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •