I found this thread on ls1tech and it looks like there are some people with 98's and turbos that are running a 2 bar map.
Has anybody here done it? and how can i get it to work?
http://www.ls1tech.com/forums/showthread.php?t=443095
thanks
I found this thread on ls1tech and it looks like there are some people with 98's and turbos that are running a 2 bar map.
Has anybody here done it? and how can i get it to work?
http://www.ls1tech.com/forums/showthread.php?t=443095
thanks
98' White TA A4 TSP 231/237 PP Stage II 59cc heads
401rwhp (unlocked) 1.594 60'-11.60 e.t.-116.98 mph
---------
98' Sport Gold Metallic TA M6 - 13.39 e.t. Bone Stock
My Trans Ams
---------
2006 Chevy Monte Carlo SS 5.3L LS4 (wifes car) stock (for now)
tttttttttttt
98' White TA A4 TSP 231/237 PP Stage II 59cc heads
401rwhp (unlocked) 1.594 60'-11.60 e.t.-116.98 mph
---------
98' Sport Gold Metallic TA M6 - 13.39 e.t. Bone Stock
My Trans Ams
---------
2006 Chevy Monte Carlo SS 5.3L LS4 (wifes car) stock (for now)
nobody with efilive has done this? or can you only do it with hptuners?
Please advise
thanks!
98' White TA A4 TSP 231/237 PP Stage II 59cc heads
401rwhp (unlocked) 1.594 60'-11.60 e.t.-116.98 mph
---------
98' Sport Gold Metallic TA M6 - 13.39 e.t. Bone Stock
My Trans Ams
---------
2006 Chevy Monte Carlo SS 5.3L LS4 (wifes car) stock (for now)
According to that thread, you need to call Rick.
Otherwise, it sounds like they wired up a 2 bar MAP resulting VE table colum headings representing a percentage of the 2 bar MAP's range rather than actuall KPA values.
You can run the 2bar map, you just need to rescale it so everything is halved, so 100kPa will measure as 50kPa, 200kPa will measure as 100kPa.
It's not ideal, but years ago we ran 99+ LS1's like that and for the most part it works just fine.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
would be real nice if live would allow adjusting the interface to reflect 50% values to match...
2001 Camaro SS
EFILive Custom OS3
Originally Posted by GMPX
how would i go about doing this?
thanks
98' White TA A4 TSP 231/237 PP Stage II 59cc heads
401rwhp (unlocked) 1.594 60'-11.60 e.t.-116.98 mph
---------
98' Sport Gold Metallic TA M6 - 13.39 e.t. Bone Stock
My Trans Ams
---------
2006 Chevy Monte Carlo SS 5.3L LS4 (wifes car) stock (for now)
If I remember you also have to disable BARO updating. If you dont after a couple starts your whole fuel map goes to crap. I found it a real pain since I can go from 200' to 2000' in an hour and I could never get it right.
I tried it like 3 years ago, unless there is a new 98 OS hack is out there it didnt work all that well for me but you could waste a lot of time with LS1edit fooling around lol.
Works fine , turn of baro updating.Originally Posted by GMPX
Dont stress about the 1/2 scaling as you are tuning to the scanner , so 50kpa in the scanner is still 50kpa in the maps just its 100kpa in actual pressure.
Auto VE update and everything works properly , you just need to adjust all the map variables that use kpa by 1/2.
it is a lot of work but we never used to have the option in the old days - same as the 98 guys have now.
so first i install a 2 bar map, then turn off baro updating and then do autoVE ?
Can you explain more on how to adjust the map variables?
thanks for your help
98' White TA A4 TSP 231/237 PP Stage II 59cc heads
401rwhp (unlocked) 1.594 60'-11.60 e.t.-116.98 mph
---------
98' Sport Gold Metallic TA M6 - 13.39 e.t. Bone Stock
My Trans Ams
---------
2006 Chevy Monte Carlo SS 5.3L LS4 (wifes car) stock (for now)