Results 1 to 3 of 3

Thread: stock maf or slp 85mm maf

  1. #1
    New Member
    Join Date
    Nov 2011
    Posts
    4

    Default stock maf or slp 85mm maf

    basically stock 2002 camaro ss--long tube headers and catback EFI live tuning software. Trying to tune VE and MAF. I have both maf,s,which one would you use.

  2. #2
    Senior Member Sid447's Avatar
    Join Date
    Jul 2005
    Posts
    178

    Default

    This is better asked on somewhere like LS1Tech.com.

    (Who don't rate the 85mm SLP maf at all).

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    First, the resistor should be removed from the SLP MAF.

    Then you can run either MAF, but you have to edit the MAF table.

    +1 what sSid said.

Similar Threads

  1. Having NO success altering WOT A/F after 85mm Lid/MAF
    By the Dragon in forum Gen III V8 Specific
    Replies: 6
    Last Post: December 3rd, 2007, 09:32 PM
  2. SLP 85mm MAF resistor, cut or not cut?
    By queso in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: October 9th, 2007, 12:50 PM
  3. Should I remove the resistor out of my SLP MAF
    By esco35m in forum Gen III V8 Specific
    Replies: 3
    Last Post: August 11th, 2007, 09:11 AM
  4. 85mm MAF calibrations
    By Chris81 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 27th, 2005, 07:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •