Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: V2 won't data log

  1. #1
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    Any one know why my v2 would log or do anything when it's hooked up to a vehicle? I've tried different vehicles and I get the same error. It used to work but now it doesn't after the update. Here is a pic I've updated everything and it shows I did.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,798

    Default

    After you flashed in the latest firmware into your V2, did you do BBx Program All...?

  3. #3
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    How do you do that?
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  4. #4
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    Everything that I know of is up to date.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,798

    Default

    Quote Originally Posted by Quinton View Post
    How do you do that?
    Start V8 S&T, goto BBx, click Open, click downarrow->Program All...


    --> note: you have to do Program All... doing just Program is not sufficient <---

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,798

    Default

    Quote Originally Posted by Quinton View Post
    Everything that I know of is up to date.
    If it was, then you would not see that LCD screem saying the *.pmm file is incompatible with firmware.

  7. #7
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    Okay ill check as soon as I get home. Another question I've got a buddy that has the same thing kinda. He also said he has updated everything. This is what his says when he try's to log his truck with the laptop connected.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  8. #8
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    Quote Originally Posted by joecar View Post
    Start V8 S&T, goto BBx, click Open, click downarrow->Program All...


    --> note: you have to do Program All... doing just Program is not sufficient <---
    After doing this it won't even let me select a controller now? It stops at this screen now.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  9. #9
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    I selected my control and programmed it but it won't let me watch anything off the v2 like it used to. Like balance rates and all that.
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

  10. #10
    Senior Member Quinton's Avatar
    Join Date
    Apr 2013
    Posts
    103

    Default V2 won't data log

    I can't find program all on my drop down?
    [/SIGPIC]
    2005 duramax LLY, 12.75 on stock motor/fuel, 68mm vgt built trans.
    Built motor by me, built trans, EFIlive by me, dual fuelers, 80% injectors.

Page 1 of 3 123 LastLast

Similar Threads

  1. Replies: 8
    Last Post: May 19th, 2011, 02:36 AM
  2. How to Data Log?
    By duramax07tmd in forum Diesel
    Replies: 13
    Last Post: May 13th, 2011, 12:28 PM
  3. Get log data off flashscan?
    By pavetim in forum Black Box Logging
    Replies: 2
    Last Post: November 23rd, 2010, 11:22 AM
  4. I can no longer log data
    By Jasondt2001 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: May 12th, 2009, 11:09 AM
  5. Replies: 11
    Last Post: October 20th, 2008, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •