Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Idle Tables

  1. #11
    Senior Member
    Join Date
    Dec 2007
    Posts
    133

    Default

    Quote Originally Posted by FUBAR View Post
    I'm just trying to keep it from idling anymore than 750 rpm. Starting my truck up at cold temps, the truck wants to startup at 1000rpm, starting like crap without my grid heater. I have hold my foot on the brake to minimize it. But then it auto idles up seconds to minutes later I thought I got it to work before, but I don't know why it quit working.
    if you can cancel it out by putting your foot on the brake then in my opinion its not the coolant temp high idle , its the IAT high idle that i hypothesized earlier.
    from my experience the coolant temp high idle will NOT cancel out by pushing on the brake, but the "mystery" cold temp high idle will
    06 Laramie 3500 QC SB 4x4 - Full billet Auto by DTT, HE351/S475 twins, EFI live, lots of custom goodies....

    07 6.2L Yukon Denali - CAI, CAT delete, self tuned with EFI Live

    03 Trailblazer 4.2L I6 - CAI, custom exhaust, EFI live

    2010 Laramie 3500 CC LB 4x4 - H&S, DPF delete, waiting for EFI Live.....

  2. #12
    New Member
    Join Date
    Jan 2012
    Posts
    5

    Default

    Yeah it is a manual my bad I should've thought about that before

  3. #13
    Lifetime Member FUBAR's Avatar
    Join Date
    Feb 2011
    Posts
    441

    Default

    Quote Originally Posted by skneeland View Post
    if you can cancel it out by putting your foot on the brake then in my opinion its not the coolant temp high idle , its the IAT high idle that i hypothesized earlier.
    from my experience the coolant temp high idle will NOT cancel out by pushing on the brake, but the "mystery" cold temp high idle will
    IAT is set to 750rpm as well. Ross, can I put a request in to find the "mystery" cold temp high idle? Those 03-05 trucks can wait...
    06 5.9L, EFILive / Silver Bullet Tuning
    06 LBZ, EFILive

  4. #14
    Senior Member
    Join Date
    Aug 2011
    Posts
    145

    Default

    fubar your right there are diff. man. vers at. i have no problum seting reg idle but want it to auto idle up when ever is sits and idle but what seems to happen is air temp rises it kicks out even when colant temp not up to operating temp. My goal was if i have to idle for long peirid it would stay there with out the pto idle up less fuel burned for it not a loaded idle like pto funtion.

  5. #15
    New Member
    Join Date
    Jan 2012
    Posts
    2

    Default

    Quote Originally Posted by FUBAR View Post
    Those 03-05 trucks can wait...
    Uuuuuuuuuuuuuuuum no we can't the suspense is killing us!!!! lol.........................SRXtreme

  6. #16
    Senior Member TexasCummins's Avatar
    Join Date
    Jul 2011
    Posts
    143

    Default

    Quote Originally Posted by skneeland View Post
    the coolant temp high idle will NOT cancel out by pushing on the brake
    Yep, my coolant temp idle up disengages after putting the truck into gear. When I go back into park the idle slowly rises back to the preset rpm.
    EFI Live - The Smarter way to tune!
    2006 Ram 2500 4x4

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Idle timing tables
    By 1000HP in forum Duramax LLY
    Replies: 42
    Last Post: February 28th, 2011, 06:42 PM
  2. Minimum Idle Airflow Tables
    By fperra in forum Gen IV V8 Specific
    Replies: 2
    Last Post: August 28th, 2009, 02:50 AM
  3. Additional Idle tables
    By Highlander in forum Gen III V8 Specific
    Replies: 0
    Last Post: July 31st, 2009, 08:37 AM
  4. Is there a way to make the pcm use the p/n idle airflow tables?
    By Highlander in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: December 26th, 2005, 03:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •