Results 1 to 6 of 6

Thread: E38 - Serial Lambda Logging - Custom BEN factor PID?

  1. #1
    Member tunedportcj5's Avatar
    Join Date
    Sep 2006
    Posts
    74

    Default E38 - Serial Lambda Logging - Custom BEN factor PID?

    I just switched over to E85 and I need to do some additional VVE and MAF cleanup. The CALC.BEN1_E38 PID won't work because the AFR data coming from the EXT.W02AFR1 is still calculated at 14.7 stoich and not 9.77. Obviously I need to use the EXT.W02LAM1 data. Shall I just create a custom PID and divide the data from SAE.LAMBDA? Is that the best approach?

    Thanks!
    David
    '94 Lexus SC300 LY2 4.8, LS6 cam/springs, E38, LS3 MAF, LS2 intake, 88mm TB, 2bar MAP, T42/4L80e, mpt70
    www.terratraction.com/gallery

  2. #2
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Default

    If it's serial, then you should be able to program the WB controller with the correct Stoich point.

  3. #3
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    "({ext.wo2lam1}/{sae.lambda})"
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  4. #4
    Member tunedportcj5's Avatar
    Join Date
    Sep 2006
    Posts
    74

    Default

    Quote Originally Posted by swingtan View Post
    If it's serial, then you should be able to program the WB controller with the correct Stoich point.
    I didn't know you could change the serial values. I was thinking only the analog outputs? I'll check it out!
    '94 Lexus SC300 LY2 4.8, LS6 cam/springs, E38, LS3 MAF, LS2 intake, 88mm TB, 2bar MAP, T42/4L80e, mpt70
    www.terratraction.com/gallery

  5. #5
    Member tunedportcj5's Avatar
    Join Date
    Sep 2006
    Posts
    74

    Default

    Quote Originally Posted by mr.prick View Post
    "({ext.wo2lam1}/{sae.lambda})"
    Thats what I was thinking. Thanks Prick! ;-)
    '94 Lexus SC300 LY2 4.8, LS6 cam/springs, E38, LS3 MAF, LS2 intake, 88mm TB, 2bar MAP, T42/4L80e, mpt70
    www.terratraction.com/gallery

  6. #6
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Default

    I know that with the Techegde, you can program quite a number of parameters in to the WB controller...
    • Serial frame rate.
    • Stoichiometric AFR value.
    • NB simulator curve shape.
    • additional I/P values ( the TE can also act as a data logger in its own right ).


    I'd assume that any WB controller that allows for serial communication of AFR / Lambda / NB Simulation, would allow for a user configuration of the Stoich point.

    Simon

Similar Threads

  1. Whats a good range of BEN factor for MAF
    By pavetim in forum Gen III V8 Specific
    Replies: 14
    Last Post: January 23rd, 2011, 01:39 AM
  2. Ben Factor Question
    By EVI in forum E37, E38 & E67 PFI ECM's
    Replies: 18
    Last Post: March 17th, 2010, 10:01 PM
  3. BEN is only for analog, right? How do I log BEN with serial logging?
    By Supercharged111 in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: July 12th, 2009, 05:08 PM
  4. Auto VE Ben Factor
    By shane in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 20th, 2008, 10:34 AM
  5. Logging BEN factor with March 20th Beta?
    By Goldfinger911 in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: March 23rd, 2008, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •