Base calc file for 2005 Escalade

[shoshorton]

Hi All - This is my first post as I am a Newbie. The information here has been invaluable for me getting my 67 corvette / LS2 resto-mod wired and cranking.

On a different track, I'm wondering if anyone has baseline or custom .tun file with calculations for a 2005 Escalade - LS1B / OS 12592618?

I was playing around with my wire's escalade and accidentally started a re-flash - I cancelled during the first 10 seconds and now have a no start situation and v7.5 is giving me calc checksum errors when I read the ecm. I don't have the original .tun file because (I am an idiot) I wasn't planning to make any mods. How much trouble am I in here? Any help would be greatly appreciated.

Here's the bad calc file if it helps at all. If there is another / better process I should be following than posting here, please let me know.

Many thanks...

[Taz]

Try this one ...


Regards,
Taz

[shoshorton]

Taz - you guys are incredible! Flashed and fixed. I can't thank you enough - works great! I even made a back-up copy of the base tune - what a novel concept :-)


If your library is missing the the base .tun for a 2007 cts-v t-56, let me know and I'll send it over. I'll be posting as I begin to tune it...connecting fuel and radiator to the rolling chassis and hope to have it running in the couple of weeks.

Again, thanks so much!

[Taz]

Glad it worked out. Thanks for the offer of the CTS-V tune in exchange - no need to send it - I already have it on file.


Regards,
Taz

[joecar]

Hi shoshorton,

Welcome to the forum

Were you doing a cal-only flash or a full flash...?