Originally Posted by
GMPX
If I recall the VATS relearn is really fussy on the LB7, best bet is the IGN on for 30 minutes trick.
So what you need to do is:
Turn IGN on, leave for 10 mins (make it 12 to be sure).
Turn IGN off for 30 seconds.
Turn IGN on, leave for 10 mins (make it 12 to be sure).
Turn IGN off for 30 seconds.
Turn IGN on, leave for 10 mins (make it 12 to be sure).
Turn IGN off for 30 seconds.
Then start the truck, at this point (yes 30 mins in total) the VATS should have done an automatic relearn.
Or to make it easier, just change {G0302} Relearn Timer from 600 Seconds to 60 seconds, then you'll only need to wait 1 minute for each key on instead of 10.
Cheers,
Ross