Fast 36 Lb injector 280-155-868

[warlock007]

I have been doing searches and find so many variations to the B3701,02,03 and B4001,02,03,04 that i dont believe or trust which one is right.

I have a 2000 vet but im running the 2002 (156) OS in it.

I am asking for someone who has these to send me a copy off all above numbers. I am not a math wiz (joecar) blows my mind with the calculations)

i found the .xls that was posted by REDHARDSUPRA which is great but then those numbers are different than ones posted by another, sorry not on my other computer to get the web address.

thanks in advance, using V2

[joecar]

Hi Mike, I don't have those other tables for those injectors.

[warlock007]

Hi joe, I'm hoping someone does??

What is best way to lean out STFT with out touching O2 switch points? I had to set bank1 25 less than B2 for them to be really close. Numbers at idle are ok but around -1/-6 and at 2000 -4/-10

[mr.prick]

BOSCH Fuel Injectors 0280155868

script in post #17

[warlock007]

Thank you mr. P!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[warlock007]

Attachment 15978


Ok, I installed today with all the numbers provided. seems to be pretty good,However I am getting a high STFT lean condition (7-20) i do not have any leaks. I added 10% to the maf tables in order to bring it down. Is this normal?

This is my current tune.

[bimbleuk]

Do a few CALC.VET or CALC.MAF runs to calibrate the MAF/VE and then see what your trims are doing?

[warlock007]

Ill do some more, my initial one up through 7100 MAFREQ was spot on at 1.00 and the VE looked pretty good.

Is it normal to have to add to the MAF table?

[joecar]

Mike, did you get 12212156.cax to work (don't place it in LS1B, but rather place it in Calibrations which is the parent folder of LS1B).

[warlock007]

I did but we need to talk so that you can clean the .cax file up

Mike