What is the difference between.......

[Kr1s]

Calc.ve and auto ve?
I just tuned my truck using the auto VE
Can i use that log to tune via Calc.Ve?
sorry if what i'm asking sounds stupid i'm new lol

[joecar]

See post #29 here: Summary-Notes

[joecar]

Differences between AutoVE and Calc.VET:

AutoVE:
- CL/LTFT are disabled;
- VE is enabled, MAF is disabled;
- corrects VE;
- is a special case of Calc.MAFT (see below).

Calc.VET:
- CL/LTFT are enabled, altho they don't have to be (i.e. can use pure wideband);
- MAF is enabled, VE is disabled;
- corrects MAF;
- calculates VE from corrected MAF.


AutoMAF:
- CL/LTFT are disabled;
- MAF is enabled, VE is disabled;
- corrects MAF;
- is a special case of Calc.VET (see above).

Calc.MAFT:
- CL/LTFT are enabled, altho they don't have to be (i.e. can use pure wideband);
- VE is enabled, MAF is disabled;
- corrects VE;
- calculates MAF from corrected VE.

[joecar]

AutoVE is a special case of Calc.MAFT.

AutoMAF is a special case of Calc.VET.

[Kr1s]

so if i wanted to use http://forum.efilive.com/showthread....ntire-VE-Table
Would i have to log again?