Hi, old thread I know, but have a couple of questions, please bare with me if anyone looks at this.

It was asked earlier on page 13, Will these help, or is there any risk to doing this on a vurtually stock E38/T43 on an 07 Escalade 6.2 non VVT/6L80E?

My tables dont look near as smooth as the OP's tables? I am assuming that is a tuned table prior to the OP's post not a result of this adjustment. I.E. his is smooth, and I can see the 5% increase in the tables. Mine is jagged and all over the place. I am experiencing some of the issues on my trans as it seems squishi, and at times, when turning a corner, I can feel the trans holding a gear, and then finally downshifting. Other than basic adjustments for tires size, speedo, a little MAF Tuning to bring it into spec, is all that has been adjusted so far, so these tables are still stock in my rom.

Any help would be appreciated.

Thanks in advance