Page 2 of 16 FirstFirst 123412 ... LastLast
Results 11 to 20 of 154

Thread: Improving shifts via the ECM

  1. #11
    Senior Member
    Join Date
    Dec 2007
    Posts
    134

    Default

    So what if I have an E67 with a T? 5L40E will this table show up for me?
    -Adam Chant
    Tune it or lose it!
    2007 Saturn SKY 2.4L Automatic - E67
    EFILive Tuned

  2. #12
    Member scottcmb's Avatar
    Join Date
    Aug 2011
    Posts
    97

    Default

    Quote Originally Posted by GMPX View Post
    You don't have to figure it out, the tables simply changed between years are are not shown if not in there, i.e, you won't see the same table set in a 2007 as you will a 2010.
    Thanks for that Ross......greatly appreciated

    Scotty

  3. #13
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by scdyne View Post
    So what if I have an E67 with a T? 5L40E will this table show up for me?
    Yes, it's on all E38 & E67's.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #14
    Lifetime Member DURAtotheMAX's Avatar
    Join Date
    Nov 2005
    Posts
    1,016

    Default

    Ross does this table have anything to do with the nasty brake torque management on the later 2010+ 6L80 SUV transmissions? Last year when I messed around with tuning a 2011 Escalade, we could never get the thing to 60' better than 2.5 or something...ECM wouldnt give 100% throttle until ~75 feet off the line after the brake was released! Tried pulling the ABS/stabilitrak fuse etc...but it was something in the TCM.
    2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison
    12.9s @ 108 mph

    many thanks to Ross and Paul

  5. #15
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    No Ben, it doesn't.
    Of course you need to turn the traction control off (I assume you can do that in an Escalade), and have {B2523} TCS Off Disables BTM set to Yes.
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #16
    Senior Member Dieselman's Avatar
    Join Date
    Apr 2010
    Posts
    121

    Default

    Hello everybody,

    I have been doing some playing around with my reported torque settings and settled on 15% raise and have my shift times at around .30 sec at low load down to .15 at WOT (thanks Rhino79 ) Seems to be shifting very nice with no flaring or harsh changes.

    Tranny shift times.ctz

    VVE13 rev6.ctz

  7. #17
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default

    Thanks for the input! I ran at the track with my only mods being long tube headers, cai, and tune on my 2010 l99 ss, 12.40 at 113! 1.91 60' on stock pirelli tires too. Very happy with the performance of the car and the consitency of the shifts now.

  8. #18
    Member scottcmb's Avatar
    Join Date
    Aug 2011
    Posts
    97

    Default

    Quote Originally Posted by Rhino79 View Post
    Thanks for the input! I ran at the track with my only mods being long tube headers, cai, and tune on my 2010 l99 ss, 12.40 at 113! 1.91 60' on stock pirelli tires too. Very happy with the performance of the car and the consitency of the shifts now.
    Yep thanks Rhino, followed your ideas and now i get constant 0.2 second shift times at WOT.

    Cheers Scotty
    2008 HSV GTS LS3

  9. #19
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default

    No prob man! I love the 6l80 tuning now! Add desired tcc slip and imo it will be complete!!!!!!!!

  10. #20
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    TCC slip tables were added in the latest release
    I'm really happy to read that everyone has had great improvement with the torque tables.
    I no longer monitor the forum, please either post your question or create a support ticket.

Page 2 of 16 FirstFirst 123412 ... LastLast

Similar Threads

  1. How mcuh should be A/F between shifts ?
    By wesam in forum Gen III V8 Specific
    Replies: 3
    Last Post: September 20th, 2010, 06:14 AM
  2. spikes during shifts??
    By drdarthinvader in forum Gen III V8 Specific
    Replies: 6
    Last Post: January 9th, 2009, 04:02 PM
  3. Shifts to soft from 1>2... HELP!
    By LS1FREEK in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 11
    Last Post: June 26th, 2008, 11:10 AM
  4. ETC help on shifts please.
    By azzhauler in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: November 8th, 2006, 10:20 AM
  5. Replies: 0
    Last Post: February 6th, 2006, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •