Results 1 to 4 of 4

Thread: Cant communicate with LBZ

  1. #1
    New Member
    Join Date
    Oct 2010
    Posts
    9

    Default Cant communicate with LBZ

    Im trying to copy the stock calibration and it wont do it.
    First it says EFIlive cannot communicate with flashscan, click ok, then says connection to ecm lost, BUT, unplug it, turn around plug it into my wifes LBZ and it works fine..
    ALSO when I plug the V2 into this one it just comes on, one orange light and the EFI Logo on the screen, Plug it in my wifes and it shows the logo, then the menu, this truck Has a remote start, So does ours but different model, so.... I believe the problem is in the truck, does anyone have any insight on this? im stumped... going to start looking over the truck, cant find a single blown fuse, I also tried pulling the radio and info fuse cause PPE says to do that if you get no communication message on there excelerator...

    Thanks in advance guys and gals!

  2. #2
    New Member
    Join Date
    Oct 2010
    Posts
    9

    Default

    18:21:38.680: Scanning for EFILive FlashScan V2 HAPI
    18:21:38.696: Autodetect interface ...
    18:21:38.976: Interface firmware version: 2.7.22
    18:21:38.976: Connection to [FSV2] interface is OK
    18:21:39.210: USB driver version: 4.0.0
    18:21:39.210: USB library version: 3.1.18
    18:21:39.242: Interface firmware model: FSV2
    18:21:39.257: Interface firmware model: FSV2
    18:21:39.288: Interface firmware version: 2.7.22
    18:21:39.304: Interface firmware date: Aug 23, 2011
    18:21:39.320: FlashScan serial number: 003816158639
    18:21:39.351: FlashScan license number: 003816158639
    18:21:39.382: Disconnecting ...
    18:21:41.644: Autodetect interface ...
    18:21:43.095: Interface not detected
    18:21:43.095: Disconnected
    18:21:43.781: Scanning for EFILive FlashScan V2 USB
    18:21:43.797: Autodetect interface ...
    18:21:45.653: Interface not detected
    18:21:46.340: Scanning for EFILive FlashScan V2 HAPI
    18:21:46.355: Autodetect interface ...
    18:21:47.806: Interface not detected

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,984

    Default

    Hi,

    Have you tried the latest version: Release-Candidate-10-Mar-11-2012

    RC10 includes newer firmware, update your V2 firmware to 2.7.24 and try again.

  4. #4
    New Member
    Join Date
    Oct 2010
    Posts
    9

    Default

    Haven't tried the update but it works on all the other trucks?

Similar Threads

  1. cannot communicate with 2005 corvette
    By radical243 in forum Gen IV V8 Specific
    Replies: 18
    Last Post: April 16th, 2011, 04:16 AM
  2. EFI LIVE V2 will not communicate
    By rubbersidedown in forum Gen III V8 Specific
    Replies: 8
    Last Post: January 7th, 2010, 05:33 AM
  3. Cannot Communicate with Flashscan
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: May 24th, 2007, 01:05 PM
  4. Cannot Communicate with Flashscan
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 23
    Last Post: May 16th, 2006, 12:48 PM
  5. Can't communicate with FlashScan
    By mcwarren in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 18th, 2006, 11:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •