Im trying to copy the stock calibration and it wont do it.
First it says EFIlive cannot communicate with flashscan, click ok, then says connection to ecm lost, BUT, unplug it, turn around plug it into my wifes LBZ and it works fine..
ALSO when I plug the V2 into this one it just comes on, one orange light and the EFI Logo on the screen, Plug it in my wifes and it shows the logo, then the menu, this truck Has a remote start, So does ours but different model, so.... I believe the problem is in the truck, does anyone have any insight on this? im stumped... going to start looking over the truck, cant find a single blown fuse, I also tried pulling the radio and info fuse cause PPE says to do that if you get no communication message on there excelerator...

Thanks in advance guys and gals!