Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Help a newbie please

  1. #1
    Junior Member
    Join Date
    Mar 2012
    Posts
    20

    Default Help a newbie please

    I just received my EFI Live setup and installed on my laptop. I'm assuming I data log the tune that's in there first and then work from there (tune is from Shane at PDW). So what now? Is there a link so something for complete newbs for how to log for the first time?

  2. #2
    Junior Member
    Join Date
    Mar 2012
    Posts
    20

    Default

    Do I have to download the most recent release candidate? Can I just plug it into the truck and log?
    06 6sp. CTD / 90hp injectors / floor it stg. 3 / 62/S475

  3. #3
    Lifetime Member
    Join Date
    Jul 2004
    Posts
    640

    Default

    Open up the V7.5 scan tool. Then go to Help => Tutorials => Scan Tool Tutorial and work through all the steps there.

    Ira

  4. #4
    Junior Member
    Join Date
    Mar 2012
    Posts
    20

    Default

    Thanks Ira.

  5. #5
    Junior Member chance cobb's Avatar
    Join Date
    Jun 2011
    Posts
    39

    Default

    one the first page of this forum there a place you can get the most resent update

  6. #6
    Junior Member chance cobb's Avatar
    Join Date
    Jun 2011
    Posts
    39

    Default

    one the first page of this forum there a place you can get the most resent updatehttp://forum.efilive.com/showthread.php?18780-Release-Candidate-10-(updated)-Mar-21-2012
    Last edited by chance cobb; March 24th, 2012 at 03:01 AM.

  7. #7
    Junior Member
    Join Date
    Mar 2012
    Posts
    20

    Default

    Ok. I tried connecting with the V7.5 scan tool and it didn't work. Error said to download V8. So I did. Now I'm just going through Ira's tutorial. I did download RC10 too. Thanks Chance.
    06 6sp. CTD / 90hp injectors / floor it stg. 3 / 62/S475

  8. #8
    Junior Member
    Join Date
    Mar 2012
    Posts
    20

    Default

    I have a HUGE problem now (I think). It is almost stuck in the middle of flashing. I'l see if I can get a screenshot but after 23 minutes of flashing i figured there was a problem. There is 4:36 left to be flashed. Now I can't exit the software, it's not timing out and the truck is all screwed up. PLEASE HELP.
    06 6sp. CTD / 90hp injectors / floor it stg. 3 / 62/S475

  9. #9
    Junior Member
    Join Date
    Mar 2012
    Posts
    20

    Default

    06 6sp. CTD / 90hp injectors / floor it stg. 3 / 62/S475

  10. #10
    Junior Member chance cobb's Avatar
    Join Date
    Jun 2011
    Posts
    39

    Default

    never seen that before

Page 1 of 2 12 LastLast

Similar Threads

  1. Newbie.
    By Devil_Z in forum Duramax LLY
    Replies: 1
    Last Post: May 24th, 2010, 07:17 PM
  2. Newbie.
    By Devil_Z in forum Gen III V8 Specific
    Replies: 0
    Last Post: May 24th, 2010, 08:50 AM
  3. Newbie???'s
    By bdr2008 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 6
    Last Post: October 11th, 2008, 03:46 AM
  4. Newbie
    By Josho in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: December 15th, 2006, 11:20 AM
  5. Newbie Q's
    By Big Kahuna in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: December 15th, 2006, 02:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •