Deleted 6.7 throws "See dealer for service" message on overhead display.

[mikebol]

Here's what I did:

1. Turn the ignition switch to the ON position (Do not start engine).
2. Press and release the brake pedal two times.
3. Fully depress the accelerator pedal slowly two times within 10 seconds
4. Turn the ignition switch to the OFF/LOCK position

Some instructions say you have to keep the accelerator pedal down when turning off the key but I did not. This is the same instructions you use to clear the overhead message at 67,500 when the CCV needs to be changed.

My theory is that my tune sees that I'm beyond 67,500 miles but doesn't know that I've replaced the filter so the message is popping up. This is just a theory mind you, I could be completely wrong.

Mike

[james1551]

My tuner told me to put the tune in again so I did today taking a little trip Saturday to the national archery tournament I will post back to see if this helped

Went about 30 miles running 70 mph got the see dealer now and check engine light

[Powder_Keg]

So you get a OHD warming to see dealer and a cel but no codes?

Mine does the same thing once I hit the highway or interstate and maintain a steady rpm over 1900. I have one tune that doesn't do it. But the only thing different from the others is timing, turbo control, and fuel quantity. Other than that everything is the same.

[2007 5.9]

There is a timer we are testing to delay the ding/OHD, stock is 10min.

We can adjust that up to 360min.

If you like you could send me the tune in stock form, ill adjust the timer and send it back and you can write your tune on top of it and test if it helps.

[mikebol]

Any update on a permanent fix for this message?

My truck throws a P242D at about 30 minutes into each drive. My tuner has turned off the code so I don't get a CEL but the overhead message and ding still persist. Fortunately for me there is only one ding per drive, not a persistent dinging. I suspect others are throwing more codes than I am which is why the overhead is more persistent.

For now I consider myself lucky, but I sure wish I could use a SIM or something to satisfy the computer.

Mike

[2007 5.9]

Any update on a permanent fix for this message?

My truck throws a P242D at about 30 minutes into each drive. My tuner has turned off the code so I don't get a CEL but the overhead message and ding still persist. Fortunately for me there is only one ding per drive, not a persistent dinging. I suspect others are throwing more codes than I am which is why the overhead is more persistent.

For now I consider myself lucky, but I sure wish I could use a SIM or something to satisfy the computer.

Mike

As I posted above there is a fix via the timer..ask your tuner to turn the timer up.

[LBZoom]

As I posted above there is a fix via the timer..ask your tuner to turn the timer up.

Can you tell me what the table # is? I just briefly browsed through a 6.7 tune with the newest v7.5 software release and didn't come across it.... thanks!

[2007 5.9]

Can you tell me what the table # is? I just briefly browsed through a 6.7 tune with the newest v7.5 software release and didn't come across it.... thanks!

It's not public yet...if you shoot me your tune, ill fix it and see if it works.

[catman3126]

Any new news on this situation? thanks.

[HVD Performance]

we are having issue with early 07.5 with the timer. Customer doesnt drive truck much maybe 10,000 miles a year hauling horse trailer. As im up to date on software but can do the beta stuff. Is there any time frame on a release to public?