Page 4 of 21 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 205

Thread: Check my data logging

  1. #31
    Senior Member
    Join Date
    Mar 2012
    Posts
    112

    Default

    ok thanks ill try that

  2. #32
    Senior Member
    Join Date
    Mar 2012
    Posts
    112

    Default

    i also found the gm asa data. it does differ a bit from the txt that i listed here. so might try that in a little bit.

  3. #33
    Senior Member
    Join Date
    Mar 2012
    Posts
    112

    Default

    never mind i found where i messed up one table .its fixed now per asa and runs !!

  4. #34
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    which table was it, what was messed up...?

  5. #35
    Senior Member
    Join Date
    Mar 2012
    Posts
    112

    Default

    in b4001 if you look at the bosch.txt file i think its in different units. then if you look at my tune file i fixed it per the asa figures. my mistake.

    so my b4001 now reads
    LABELS Injector Flow Rate (Grams/Second)
    Manifold Vacuum kPa {link: GM.MANVAC} Value
    0 5.054688
    5 5.085938
    10 5.117188
    15 5.148438
    20 5.179688
    25 5.210938
    30 5.242188
    35 5.273438
    40 5.296875
    45 5.328125
    50 5.359375
    55 5.390625
    60 5.421875
    65 5.445313
    70 5.476563
    75 5.507813
    80 5.539063

    and i misunderstood the b4001 bosch.txt file that says
    [B4001]
    ;Row Data
    ;--- -----------------------------------------------------------------------
    0= "40.117135"
    1= "40.365155"
    2= "40.613174"
    3= "40.861194"
    4= "41.109213"
    5= "41.357232"
    6= "41.605252"
    7= "41.853271"
    8= "42.039286"
    9= "42.287305"
    10= "42.535324"
    11= "42.783344"
    12= "43.031363"
    13= "43.217378"
    14= "43.465397"
    15= "43.713416"
    16= "43.961436"

  6. #36
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yep, 40 g/s vs 40 lb/hr is a big difference, glad you found it.

  7. #37
    Senior Member
    Join Date
    Mar 2012
    Posts
    112

    Default

    ok guys so i have the injectors set for now.. and here is my autove tune and my first log, just so you can check it out. now from here on out i apply the filter as stated in tutorial and follow the tutorial for now correct. thank you for the help so far. im still learning that spread sheet even though i found the table data b/c in future i may wanna change or help a friend.

    also this is my ben map avgerage before any filters applied. also this is from some short neighborhood driving, freeway, and some small 1-4 pulls
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	log1avg.jpg 
Views:	155 
Size:	616.7 KB 
ID:	12867  
    Attached Files Attached Files
    Last edited by dm79; April 4th, 2012 at 03:58 PM.

  8. #38
    Lifetime Member BLK02WS6's Avatar
    Join Date
    Jun 2005
    Posts
    442

    Default

    Whoa - B3605 is way jacked up! You are commanding way lean... Let me look over your tune and I'll post up some suggested changes.
    GM EFI Tuner
    02 WS6 9.41 @ 143 MPH 3675#, drag radials, pump gas, through the mufflers - sold


  9. #39
    Senior Member
    Join Date
    Mar 2012
    Posts
    112

    Default

    CRap I don't know why I did that again. I'll fix it. I messed that up first time

  10. #40
    Lifetime Member BLK02WS6's Avatar
    Join Date
    Jun 2005
    Posts
    442

    Default

    Here, try this one...
    Attached Files Attached Files
    GM EFI Tuner
    02 WS6 9.41 @ 143 MPH 3675#, drag radials, pump gas, through the mufflers - sold


Page 4 of 21 FirstFirst ... 2345614 ... LastLast

Similar Threads

  1. data logging
    By ecc_33 in forum Duramax LB7
    Replies: 0
    Last Post: January 18th, 2012, 12:30 PM
  2. Data Logging Help
    By djfrazier in forum Cummins 5.9L
    Replies: 6
    Last Post: October 17th, 2011, 12:25 AM
  3. V1 Data logging
    By Harrismarine in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: December 2nd, 2007, 06:01 PM
  4. Data logging a 98
    By minytrker in forum General
    Replies: 2
    Last Post: February 25th, 2006, 01:10 PM
  5. Data logging
    By never satisfied in forum Duramax LB7
    Replies: 1
    Last Post: February 20th, 2006, 01:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •