Results 1 to 6 of 6

Thread: Injector balance rates what # makes you worry?

  1. #1
    New Member
    Join Date
    Aug 2012
    Posts
    6

    Default Injector balance rates what # makes you worry?

    Hey fellas got around to checking out my injector balance rates at idle. I have 4 good ones, then #3 averages +3.2 and #5 averages -2.0.

    What # do you start becoming concerned? I think I read +-4 and it's time to go shopping but IDK.
    Truck had 49K and since 36k has had 3 micron filtration. Thanks, Rye.
    06- TRE/E.D./EFI by Les@SilverBullet

  2. #2
    Senior Member DODGE74's Avatar
    Join Date
    Oct 2011
    Posts
    103

    Default

    Hey Ryan,

    check out this thread. It might answer a few questions for you.

    http://forum.efilive.com/showthread....lp-ASAP-Please
    06 QCLB, DRW
    Single pump
    Single turbo
    EFILive 772hp 1398tq

    gordon@innovativediesel.com

  3. #3
    New Member
    Join Date
    Aug 2012
    Posts
    6

    Default

    Thanks Gordon, got to say maybe because I'm a Former Marine, I'm still a little confused as to what number EFI shows vs what number it is in the truck. As it seems it may be in the firing order or it may be from front to firewall. I also did my log at cold start up, I'm gonna try it again at operating temp just to compare. Still don't know if the 3.3 is worth panicking over, no smoke at start up, no poor idle quality, and no miss. IDK.
    06- TRE/E.D./EFI by Les@SilverBullet

  4. #4
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    In my mind and the way I work...anything over 2.0 is showing signs of a weak nozzle...over 3.0 and its time to look for new nozzles. Over 4.0 and your on short time and by then your gonna have some performance issues.

    Same thing goes for the (-) numbers...anything over a -3.0 and your running into smoke issues and probably a mm3 value that has wild swings in it at idle.

    Anything either side of 0 +/- 2.0 and I say its good. Above and over that...its time for some injector love.

    Of course this is my opinions and how I work..other may feel/say differently.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  5. #5
    Senior Member DODGE74's Avatar
    Join Date
    Oct 2011
    Posts
    103

    Default

    Quote Originally Posted by RyeThomas View Post
    Thanks Gordon, got to say maybe because I'm a Former Marine, I'm still a little confused as to what number EFI shows vs what number it is in the truck. As it seems it may be in the firing order or it may be from front to firewall. I also did my log at cold start up, I'm gonna try it again at operating temp just to compare. Still don't know if the 3.3 is worth panicking over, no smoke at start up, no poor idle quality, and no miss. IDK.
    If your not having any issues then I wouldnt let it bother you.

    Plus, if your in tune with your truck like I am with mine then you'll know when somethings not right.

    I was having a rough idle for about 3-5 seconds with white smoke.

    It was time for me.
    06 QCLB, DRW
    Single pump
    Single turbo
    EFILive 772hp 1398tq

    gordon@innovativediesel.com

  6. #6
    New Member
    Join Date
    Aug 2012
    Posts
    6

    Default

    Thanks guys for the answer, I will keep an eye on it and log it a few more times and see. Got my new tune with some added fuel toady time to go for a ride!
    06- TRE/E.D./EFI by Les@SilverBullet

Similar Threads

  1. LB7 injector balance rates
    By minytrker in forum Duramax LB7
    Replies: 4
    Last Post: August 24th, 2014, 02:51 PM
  2. injector balance rates
    By Hunter t in forum Diesel
    Replies: 9
    Last Post: June 11th, 2012, 12:38 PM
  3. How to scan/check injector balance rates?
    By duramax07tmd in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: February 7th, 2011, 02:50 PM
  4. LB7 Fuel Injector balance rates reading 0
    By StuntHeavy in forum Duramax LB7
    Replies: 1
    Last Post: July 7th, 2010, 02:03 PM
  5. Balance rates
    By diesel freak 123 in forum Duramax LB7
    Replies: 2
    Last Post: April 22nd, 2008, 02:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •