Are you guys still on schedule to ship the second group out yet? The date was 2-7. Just checking. Can not wait to get it in...
BowlingSS
Are you guys still on schedule to ship the second group out yet? The date was 2-7. Just checking. Can not wait to get it in...
BowlingSS
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
I just logged into the forum to ask the exact same question...
02 C5 Coupe - LS7, TSP 265 LS7 heads, ARH, Z06 cat-back, HREs, 3.73 gears, Wilwood brakes, DeWitts radiator
15 C7 Z5 1 Coupe - stock for now
12 Avalanche - tune, Corsa Touring
Due to a supplier that did not deliver product on time, manufacturing has been pushed back by 1 week.
At this stage we expect product to be available from Monday next week. However, we have no guarantee that the supplier will not delay again. It is extremely frustrating and unfortunately, out of our control.
We appreciate your patience. We are doing everything we can to minimize the delay.
The part that is delaying the process is the Orange WO2 socket that is mounted in the side of the FlashScan unit. The supplier committed (in writing) to a January delivery date, but only had 13 in stock (computer error/human error, who knows?). We are now waiting for about 900 (600 plus spares) to be shipped.
Regards
Paul
Thanks for the update, Paul.
02 C5 Coupe - LS7, TSP 265 LS7 heads, ARH, Z06 cat-back, HREs, 3.73 gears, Wilwood brakes, DeWitts radiator
15 C7 Z5 1 Coupe - stock for now
12 Avalanche - tune, Corsa Touring
i will need to change shipping address as we shift from the 12 /02..post box will remain the same..
Send an email with your order number in the subject to orders@efilive.com with your new address - we'll add a comment to the order so that when it ships it will go to the correct place.Originally Posted by zrx1200
Regards
Paul
Any chance to get the scanner now, and have the little orange o2 connector when they come in?
I wish that were the problem. We would have built them weeks ago :(Originally Posted by dbaxter_ss
There are four orange pieces:
Two sockets that are mounted (soldered) onto the FlashScan circuit board and two plugs that plug into the sockets. The ones that are short are the sockets that are mounted on the circuit board - we have plenty of the plugs.
Murphy's law in action.
Regards
Paul
:( bummer.