Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36

Thread: filter setting

  1. #21
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default

    Can you post up the log file of your RR.
    It's all good until it goes "Bang"

  2. #22
    Member
    Join Date
    Jul 2008
    Posts
    92

    Default

    i have not saved a log as they seem screwed. I have my tune setup for the RR if thats what you need

  3. #23
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default

    I was just going to see if your log acted the same way on my laptop.
    See if you can track this log with your software.
    Attached Files Attached Files
    It's all good until it goes "Bang"

  4. #24
    Member
    Join Date
    Jul 2008
    Posts
    92

    Default

    yep it shows up alright. I show a line through my ben title since I used a lc1


    my issue seems to reside in the tune tool refusing to leave the 15 kpa column. if it would go to other cells like the scan tool shows when recording I would be set.

  5. #25
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default

    The log I posted up tracks fine in the tune tool on my laptop,did it track ok in your tune tool or was it still stuck on 15kpa.
    It's all good until it goes "Bang"

  6. #26
    Member
    Join Date
    Jul 2008
    Posts
    92

    Default

    humm.. i did not try. I wasnt aware I could do that.

  7. #27
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default

    As long as the table in the tune has the same axis as the tune that was logged it should still track in your tune file.
    It's all good until it goes "Bang"

  8. #28
    Member
    Join Date
    Jul 2008
    Posts
    92

    Default

    ok, took me a little but yes, your log is doing the same thing in my tune tool as my log. it only shows the first column during play

  9. #29
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default

    Have you tried maybe reinstalling the software or upgrade to the latest version if you have not already.
    It's all good until it goes "Bang"

  10. #30
    Member
    Join Date
    Jul 2008
    Posts
    92

    Default

    i upgraded with no change, uninstalled rebooted installed and rebooted with no change im at a loss. somehow its saving the problem

Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. Filter Sets
    By mr.prick in forum RoadRunner Real-Time PCM Emulator
    Replies: 4
    Last Post: August 17th, 2008, 06:17 AM
  2. Particle Filter
    By nqcv8 in forum General (Diesel)
    Replies: 3
    Last Post: April 11th, 2008, 12:18 PM
  3. wideband filter?
    By pwilson22000 in forum General
    Replies: 1
    Last Post: July 13th, 2006, 04:10 AM
  4. map independent filter setting request
    By redhardsupra in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: April 10th, 2006, 10:24 AM
  5. Filter Question??
    By BowlingSS in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: July 27th, 2005, 09:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •