Thanks Joe! I actually was doing some googling and it brought me to a post of yours on ls1tech about putting the calc_pids.text into the v7.5 user configuration. I have done that from the one i dumped on my desktop last week, but it looks like I had already done that back on april 14th of this year....probably when I started having this round-about issue
N2L,
Here is calc_pids.txt file to which I added the pid CALC.DAT constructed from table B4901 from your tune file Saf.tun from post #15 above.
What is your measured rail pressure...?
What injectors do you have (flowrate @ what pressure)...?
Car is 2000 Corvette, correct...?
I reread thru the thread, you said the injectors are the stock LS6 28 lb/hr injectors...
ok, do this, goto www.tunefiledepot.com and find a 2002 Corvette Z06/LS6 file and copy all of the injector tables into your tune file.
I tried the calVE deal and couldn't get it to work on my 98 pcm, obviously I must have missed something but there was a certain pid they wanted and I couldn't get it to work. I just stuck with autoVE and autoMAF :shrug: Works for me, my car runs great. Just takes a bit longer to do form what I understand. No biggie.
Ok, I will try to post this again, as last time it timed out and lost my text!
My buddy has needed his v2 cable so I could not work on my car for the last 1 1/2 weeks or so.
I have tried to use the new list, but i still have 2 red x's. Attached are my new tune to upload in which I have corrected my injector tables, all of them to match a 2003 z06 in which these injectors are. Stock rail pressure in which i think it used to read about 58-59 psi or something.
Which log will this be? a Calc.vet? What other changes to my tune will I need to do in order to make this work?
Thanks for everybody's patience!
And my calc_pids.txt is the file on reply #43. Dropped into the user configuration folder of EFI live V7.5