Results 1 to 2 of 2

Thread: E78 benchtop power and jtag pins?

  1. #1
    New Member
    Join Date
    Apr 2012
    Posts
    1

    Default E78 benchtop power and jtag pins?

    I have a GM/Delphi E78 ecu that I want to modify. Can anyone tell me what pins I need to connect to get the thing to power up on the bench? I'm guessing J1-19 and J1-20 need +12v. Perhaps others too. Also, how about the jtag pin definitions on the nexus connector? Do these need pullup resistors? Thanks.

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,061

    Default

    This isn't a DIY site Jon, don't expect to be told Nexus pinouts and how to flash them.


Similar Threads

  1. E78 1.4 cruse vats patch?
    By MattS in forum E78, E83, E84 PFI ECM's
    Replies: 19
    Last Post: May 9th, 2012, 01:01 PM
  2. SONIC turbo - E78?
    By Boost in forum E78, E83, E84 PFI ECM's
    Replies: 22
    Last Post: February 1st, 2012, 09:24 AM
  3. E39 , E78 ECM tuning almost done
    By GMPX in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 16
    Last Post: September 15th, 2011, 02:18 PM
  4. E39 & E78 Custom OS's on the way
    By GMPX in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 8
    Last Post: October 11th, 2010, 09:16 AM
  5. Direct (BDM / JTAG) Datalogging?
    By N0DIH in forum RoadRunner Real-Time PCM Emulator
    Replies: 0
    Last Post: April 28th, 2010, 04:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •