PID for LMM to see torque?
Is there a PID that you don't have to be on a dyno for that tells you how much torque the truck is putting out while logging? This is for my LMM and I have builds 206 and 197. And is there a PID that tells you if your pulling torque due to torque management. I know there are pids but i've used them before and says not supported, maybe it's different in the newest builds.
Which ones are they that say not supported. Might be calculated PIDs requiring more than one PID needed to display a calculated PID. A calculated PID is a Formula of one or more PIDs with numbers to achevie the PID data. Example is the Allison Slip PID. the data is based on the 5th gear ratio if a 5 speed or 6th gear ratio if 6 speed. Any other gear the data will be incorrect.
Brian
2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White.
With the LMM Duramax 365hp/660tq, MW7 Allison 1000 6-speed
EFILive LMM DSP5 Settings, 500HP, 450HP, 400HP,Tow with Turbine Brake, and Stock HP.
UA Steamfitter, Local 136 Evansville, IN - Remember if you want to play you got to pay.
Posting Permissions
Reply With Quote