Auto to manual (tune)

[K3vin]

Total newb so forgive me if this is all wrong.

I'm looking to flash a 5.3 Vortec Gen3, with harness modified for 'standalone' operation, changing it from auto (4L60E) to manual.

Can anyone help me out with a manual version of this, with vats, smog etc already removed?

[Taz]

Post your tune ... difficult to offer suggestions without knowing what OS / PCM you are using.


Regards,
Taz

[K3vin]

Post your tune ... difficult to offer suggestions without knowing what OS / PCM you are using.


Regards,
Taz

Thanks for the reply.

It was suggested to me by the guys I bought the V2 from that I just obtain a manual version (GM made 4.8 and 5.3 Silverado with manual trans) and reflash using that tune, ignoring my original tune all together.

btw~ sorry if this is posted in the wrong area admin.

[Taz]

OK ... do you have a 512 Kb LS1-B PCM or a 1 Mb LS1-B PCM ? Are you using a DBC or DBW setup ? Does your wiring harness have Blue / Red PCM connectors, or Blue / Green PCM connectors.

Again, difficult to assist without more information.

For reference tunes - check out the www.tunefiledepot.com


Regards,
Taz

[K3vin]

It's a 512 kb, red and blue, DBC, from an 01 Silverado 5.3 Vortec motor.

[hog]

OK ... do you have a 512 Kb LS1-B PCM or a 1 Mb LS1-B PCM ? Are you using a DBC or DBW setup ? Does your wiring harness have Blue / Red PCM connectors, or Blue / Green PCM connectors.

Again, difficult to assist without more information.

For reference tunes - check out the www.tunefiledepot.com


Regards,
Taz

That website is NO MORE. EFILive is cutting back.

peace
Hog

[cindy@efilive]

That website is NO MORE. EFILive is cutting back.

peace
Hog

You're referencing a 4 year old post. EFILive never owned or managed tune file depot, but the owner has taken it down.

You'll find links to other resources using the search feature.

Cheers
Cindy


Sent from my iPad using Tapatalk

[Taz]

Go to the website link in post #4 - download 2002 tunes using OS 12212156 - for both a 5.3 L truck and a Camaro equipped with a manual transmission.

Use EFILive software to swap the transmission segments (Cal & Diagnostic) from the Camaro tune into the truck tune - this would become your base tune.


Regards,
Taz

[K3vin]

Okay, looks like my only option at this point. Thanks again for your advice :-)

[ScarabEpic22]

Its a much better and easier option than trying to patch an auto file to ignore the fact that there's no auto trans anymore. Just save your stock file and use one of the ones Taz posted above.