injector flow rate issues!

[AGRO]

hi all, im about to change the ifr values using the spreadsheet, i noticed the default are values are very different to the stock ones i have.

stock values
28.150200
28.584234
29.204282
30.754404
31.126433
31.622471
31.994501
32.180515
32.366530
32.676554
32.862568
33.110588
33.482617
33.730636
34.102665
34.536699
34.970733


default values

36.4892

36.7166

36.9426

37.1672

37.3905

37.6125

37.8332

38.0525

38.2707

38.4875

38.7032

38.9177

39.1310

39.3431

39.5541

39.7640

39.9728

if i use the default values and enter the upgrade values, will this pose a problem?

[joecar]

The spreadsheet requires you to enter rated flowrate, rate pressure, fuel rail pressure, and it computes the new IFR values, overwriting the defaults; so you can just ignore the defaults.

Are you using the newer spreadsheet that has a tab labelled "EFILive"...?

[joecar]

When you get a chance, post your rated flowrate/pressure, fuel rail pressure and new IFR values so we can look at them.

[AGRO]

whoooops! makes me feel real smart, thanks for the rply iguess if you dont ask you wont know, i though that the default values were there as a base, then all calculations were made from there. thanks for clearing that up mate.

edit: yes i am using the efilive labelled spreadx sheet

[AGRO]

70.3894

70.8281

71.2640

71.6974

72.1281

72.5563

72.9820

73.4052

73.8259

74.2443

74.6603

75.0741

75.4855

75.8948

76.3018

76.7067

77.1095

thats the new calc fuel rail press 58psi 62lb injectors r8td @ 45psi

[joecar]

Agro,
Yes, I calculate those same lb/hr values using your numbers.
Cheers
Joe