ben pid
so I am in the process of fixing the offset on my efl live v1 / plx setup and can not for the life of me figure out the ben pid once I get the afr to read correct. everything I have tried comes up with an error. SO can anyone give me a few pointers to get this working. below is my calc pid file with just the temp afr fix. I have not checked the offset yet but that formula gets me really close to my gauge.
calc_pids.txt
2004 GMC ECSB Z-71 6.0L 219/230 .606/.605 114+4, Patriot Gold Springd, AEM long tubes, 3" magnaflow, PLX Wideband, Comp pushrods, E-Fans
old setup 5.3 AEM Longtubes Modified with 3" Magnaflow, Intake, EFI Live, PLX Wideband, 206/212-.515/.522 112, stock heads milled .030", Patriot gold dual springs, comp pushrods, E-Fans
Try this calc_pids-6.txt
yes that works thanks. I was messing up on the prn unit i was trying to make it ben and it wouldnt go thru.
2004 GMC ECSB Z-71 6.0L 219/230 .606/.605 114+4, Patriot Gold Springd, AEM long tubes, 3" magnaflow, PLX Wideband, Comp pushrods, E-Fans
old setup 5.3 AEM Longtubes Modified with 3" Magnaflow, Intake, EFI Live, PLX Wideband, 206/212-.515/.522 112, stock heads milled .030", Patriot gold dual springs, comp pushrods, E-Fans
Posting Permissions
Reply With Quote