Just want to be clear on this and please correct me if I am wrong.
I have 2003 S10 with the LS1b PCM (I thnk thats what u refer it to) or 1MB
I have a 30-4100 AEM Wideband gauge setup
I have EFILive V1
I am using my 0-5v white wire from my AEM WB to the EXT-AD1 side orange plug input of the V1.
I am understood that I use the PLX PIDs which are the same as AEM needs.
Anytime I want to do a log, I want to always utilize the WBO2? Right?
I need to keep my PIDs under 24, so I should start my PID list to include the ones listed below at all cost and the rest I need as well for whatever type of log I am conducting?
I have to log my AEM using the PLX PIDs. The 3 minimum PIDs to do so are :
EXT.AD1 (calls EFILive to record that external channel)
CALC.AFR_PLX1 (since AEM uses those)
CALC.BEN_PLX1 (since AEM uses those) - I dont understand what a base effec numerator is
The above I basically gathered from the Auto VE Tuning tutorial.
But I was also prior told I needed to use in my logs:
EXT.AD1 (same as above)
CALC.AFR_PLX1 (same as above)
CALC.W02BEN (different as above) Is this the same as the BEN.PLX? Different and if so why?
GM.EqivRatio (added PID and I dont understand it either.
When do I use the top 3? For AutoVE only and the bottom 4 for all other logs/tuneing?
Or am I missing the noat all together somehow? Thx in advance for schooling me, Michel