Results 1 to 3 of 3

Thread: tune pulling fuel

  1. #1
    Junior Member
    Join Date
    May 2011
    Posts
    13

    Default tune pulling fuel

    i have a lb7 with a s366 and stock fuel system my tune pulse tables are commanding 3150us but the truck will only pull 2800us cant seem to find the table thats the culprit

  2. #2
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    What is the desired fuel rate? Have you changed the torque tables to allow it to go to full 100MM3+ fueling?
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  3. #3
    Junior Member
    Join Date
    May 2011
    Posts
    13

    Default

    Yes the log shows around 95/104 for mm flow

Similar Threads

  1. Pulling tune
    By L31Sleeper in forum General (Diesel)
    Replies: 18
    Last Post: March 2nd, 2011, 09:05 PM
  2. sled pulling tune
    By browneflatwork in forum Allison 5 & 6 Speed
    Replies: 4
    Last Post: November 18th, 2009, 03:42 PM
  3. pulling tune "allison"
    By drdiesel in forum Allison 5 & 6 Speed
    Replies: 0
    Last Post: May 24th, 2009, 04:13 AM
  4. sled pulling tune
    By remington_43040 in forum Allison 5 & 6 Speed
    Replies: 0
    Last Post: April 15th, 2009, 03:20 PM
  5. Pulling out tune with Pin56 COS
    By Hawgjawz in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: April 12th, 2008, 01:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •