Chev/Holden 1.4L Cruze E85 FlexFuel Conversion

[GMPX]

The 24 channel limit on pass through, it's a v7.5 thing going back to the old LS1 PCM.
Below is my V2 BBL config, 42 channels.

[Boost]

I always use laptop, and I was having this issue even with much less than 24 PIDs. Will try BBL for the first time, and report.

[Boost]

Also, are we using V8 for scanning now? Or just BBL? Because I was using V7 Scan Tool.

[scdyne]

Yes, I haven't used a laptop in my car for at least 1 year. It's been BBL since it was available.
Well it looks like I'm out of the market for a Cruze as my wife picked the 328i and we love the crap out of it.. Long story short - she broke her neck in December, got a C5-C6 fusion and wanted a "Halo" car in celebration of her recovery.

What sps rate are you getting with the 42 channels? I have always assumed it was a limitation of the chip in the hand-held and never tried more than 24 channels at a time. If I could get 10 sps or better for most PID's and run 50 it would be much better than swapping groups for different PID's when I stack it up with too many _M type.

[Boost]

Ok thanks, so could you guys please link a topic that helps you set up BBL or just give some brief pointers? I will also look for this info now and try to do it in the meanwhile. Does it require an SD card?

[cindy@efilive]

The Verano is a Cruze, with some nice Buick touches and big engines.

Nice little article today on the Verano at GM Authority

http://gmauthority.com/blog/2012/07/...ty-31-highway/

Cheers
Cindy

[joecar]

Ok thanks, so could you guys please link a topic that helps you set up BBL or just give some brief pointers? I will also look for this info now and try to do it in the meanwhile. Does it require an SD card?

Doesn't need an SD card, but they are sooo cheap and you can store sooo many log/tune files...

you will need to run the V8 S&T program to configure the BBx (setup scan pidlists, setup tune ECM, setup DTC) and program it to your V2...

but first download/install the latest V7 and V8 software from the EFILive downoads page, and flash in the latest bootblock/firmware, do that before configuring BBx.

[Boost]

Thanks Joe and Cindy!!

[Eye78]

I have a 2005 HSV Grange and noticed the E80 tables in the tune. Is the flex fuel sensor a usable item with the e40 pcm?

Thanks

[GMPX]

No, sorry, as far as I know FlexFuel was never finalised on any E40 applications.