Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Standalone CMB849

  1. #1
    Senior Member
    Join Date
    May 2009
    Posts
    195

    Default Standalone CMB849

    Has anyone attempted to or successfully used an 06-07 5.9 oem ecm to run one of these engines on a stand?

  2. #2
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    I don't see why it won't work.

    Flash a manual OS and disable all dtc that come up.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning
    silverbullettuning@gmail.com
    www.youtube.com/ljszmidt
    http://www.facebook.com/SilverBulletTuninig

  3. #3
    Senior Member
    Join Date
    May 2009
    Posts
    195

    Default

    I was thinking the same thing until I looked at my first manual os yesterday and realized they have all the auto trans tables also. Not sure it even would matter. Should be as simple as hooking up appropriate power and ground, all necessary sensors, and can bus and a data link for tuning and it should run

  4. #4
    Lifetime Member anarchydiesel's Avatar
    Join Date
    Jun 2011
    Posts
    614

    Default

    It should not be a problem other than without a speed signal it may think that it is in idle mode and give you some MM3 limiting. We have fought with this in our pro-street truck, and have been able to tune around it so far.

    Anarchy Diesel Tuning/ Advanced Injection Diesel Technologies
    EFI Live Cummins Beta Tester
    Duramax and Cummins Tuning
    423-506-7427

  5. #5
    Lifetime Member dansdieselp's Avatar
    Join Date
    Apr 2009
    Posts
    606

    Default

    Yes. Same standalone we have for the pull trucks.

  6. #6
    Junior Member chance cobb's Avatar
    Join Date
    Jun 2011
    Posts
    39

    Default

    Quote Originally Posted by dansdieselp View Post
    Yes. Same standalone we have for the pull trucks.
    is that just an 06 ecm ?
    06 mega cab ddp twins ddp 150s arp 625s and all the other goodies !! old numbers 12.23 116mph @8500lbs

  7. #7
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default

    any 06/07 5.9 ecm

  8. #8
    Junior Member chance cobb's Avatar
    Join Date
    Jun 2011
    Posts
    39

    Default

    interested in knowing if you can make an 03 ecm work as the same as an o6 ecm in a race only truck ?
    06 mega cab ddp twins ddp 150s arp 625s and all the other goodies !! old numbers 12.23 116mph @8500lbs

  9. #9
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default

    Sure you can. It would be easier being there is already standalone harnesses out for 03-05

  10. #10
    New Member spooled05's Avatar
    Join Date
    Dec 2011
    Posts
    6

    Default

    Im trying to do a bench flash and have all the wires connected to ecm properly and was wondering if any of yall could tell me what wires i need besides the 2 can wires from ecm and what places to put them in the diagnostic connector

Page 1 of 2 12 LastLast

Similar Threads

  1. Cummins Standalone?
    By wickedcummins in forum Do you want to be a Beta Tester?
    Replies: 4
    Last Post: January 12th, 2012, 01:41 AM
  2. Standalone reprogramming...
    By picnic_george in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: October 2nd, 2011, 06:07 PM
  3. $0502 Error when attempting BBR on CMB849
    By vortecfcar in forum AutoCal
    Replies: 3
    Last Post: June 10th, 2011, 05:56 AM
  4. E38 Standalone problems
    By GAMEOVER in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: April 10th, 2011, 11:17 AM
  5. Standalone DVT?
    By Cougar281 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: July 12th, 2008, 12:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •