I am 100% to date on all patches and firmware... When it trys to read it comes up. Script exited with code $0311: Mode no supported
Thanks.
I am 100% to date on all patches and firmware... When it trys to read it comes up. Script exited with code $0311: Mode no supported
Thanks.
Are you selecting the proper ecm when your trying to read it? It could be a 5.9 or 6.7.
yes I sure am... I even let auto detect pick and it still won't read it..
5.9 or 6.7? I have both here as well as the updated software. I could test both to see if it is a software issue if needed.
2013 LML, 550hp with factory emissions, stock cp4 and compound turbos.
2002 LBZ, 4x4 (Max'd Out) 6000lbs 9.36 @ 154 mph NHRDA Champion and Record holder
1965 El Camino, duramax 9.6 @ 149MPH
All EFI tuned by Adrenaline Truck Performance
it is a 5.9 Rob, I wasted about 1.5 hours of mine and one of your guys time trying to check everything out on my efilive... Please let me know what you find... This is Aaron @ Smokin' Guns Performance
I tested it on our 5.9 2007. auto detected fine and copied out fine. Try it on another truck if possible Aaron. This will tell you if it's a truck issue or something on your end.
2013 LML, 550hp with factory emissions, stock cp4 and compound turbos.
2002 LBZ, 4x4 (Max'd Out) 6000lbs 9.36 @ 154 mph NHRDA Champion and Record holder
1965 El Camino, duramax 9.6 @ 149MPH
All EFI tuned by Adrenaline Truck Performance
If it's been tuned before there is every chance the ECM has been locked by the previous tuner. If you were trying to read an ECM locked by EFILive this is the error you will get, I believe a Smarty locked ECM will give the same error.
I no longer monitor the forum, please either post your question or create a support ticket.
Truck has been programed by smarty but was removed before we tried to read it...
Is this the truck that I sent you a tune for a few weeks ago??
Differnt truck