Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Unable to Read 07 cummins ECM

  1. #1
    Junior Member
    Join Date
    Apr 2012
    Posts
    10

    Default Unable to Read 07 cummins ECM

    I am 100% to date on all patches and firmware... When it trys to read it comes up. Script exited with code $0311: Mode no supported

    Thanks.

  2. #2
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default

    Are you selecting the proper ecm when your trying to read it? It could be a 5.9 or 6.7.

  3. #3
    Junior Member
    Join Date
    Apr 2012
    Posts
    10

    Default

    yes I sure am... I even let auto detect pick and it still won't read it..

  4. #4
    Lifetime Member IdahoRob's Avatar
    Join Date
    Apr 2006
    Posts
    736

    Default

    5.9 or 6.7? I have both here as well as the updated software. I could test both to see if it is a software issue if needed.
    2013 LML, 550hp with factory emissions, stock cp4 and compound turbos.
    2002 LBZ, 4x4 (Max'd Out) 6000lbs 9.36 @ 154 mph NHRDA Champion and Record holder
    1965 El Camino, duramax 9.6 @ 149MPH

    All EFI tuned by Adrenaline Truck Performance

  5. #5
    Junior Member
    Join Date
    Apr 2012
    Posts
    10

    Default

    it is a 5.9 Rob, I wasted about 1.5 hours of mine and one of your guys time trying to check everything out on my efilive... Please let me know what you find... This is Aaron @ Smokin' Guns Performance

  6. #6
    Lifetime Member IdahoRob's Avatar
    Join Date
    Apr 2006
    Posts
    736

    Default

    I tested it on our 5.9 2007. auto detected fine and copied out fine. Try it on another truck if possible Aaron. This will tell you if it's a truck issue or something on your end.
    2013 LML, 550hp with factory emissions, stock cp4 and compound turbos.
    2002 LBZ, 4x4 (Max'd Out) 6000lbs 9.36 @ 154 mph NHRDA Champion and Record holder
    1965 El Camino, duramax 9.6 @ 149MPH

    All EFI tuned by Adrenaline Truck Performance

  7. #7
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    If it's been tuned before there is every chance the ECM has been locked by the previous tuner. If you were trying to read an ECM locked by EFILive this is the error you will get, I believe a Smarty locked ECM will give the same error.
    I no longer monitor the forum, please either post your question or create a support ticket.

  8. #8
    Junior Member
    Join Date
    Apr 2012
    Posts
    10

    Default

    Truck has been programed by smarty but was removed before we tried to read it...

  9. #9
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010
    Posts
    1,835

    Default

    Is this the truck that I sent you a tune for a few weeks ago??

  10. #10
    Junior Member
    Join Date
    Apr 2012
    Posts
    10

    Default

    Differnt truck

Page 1 of 2 12 LastLast

Similar Threads

  1. Can I read Cummins?
    By pavetim in forum Cummins 6.7L
    Replies: 4
    Last Post: June 11th, 2012, 11:56 AM
  2. Unable to read PIDS
    By EndFloat in forum Petrol / Gas
    Replies: 1
    Last Post: May 4th, 2012, 04:45 AM
  3. Unable to read ECM
    By chrisincomfort in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 11
    Last Post: July 18th, 2011, 04:29 AM
  4. Unable to read DTC's
    By rdaniels in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: May 18th, 2008, 04:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •