Can you please send trace files as per the end of this page: http://support.efilive.com/kb_articl...8254-QOGC-9586
Regards
Paul
Can you please send trace files as per the end of this page: http://support.efilive.com/kb_articl...8254-QOGC-9586
Regards
Paul
Before asking for help, please read this.
Thank you Paul for all your work on the update! I installed all of it as soon as it came out and have already used it. V8 works great, but I did get a bootloader error in V7 trying to read an LS1b. I ended up reading it with V8, making changes in V7, then flashing with V8 just to be safe since the read failed.
'12 Caprice PPV 6.0 L77 - daily transportation
8.7 @ 84 (1/8 mile) bolt-ons
'02 Silverado RCSB 5.3 L59 - regularly street driven
8.2 @ 86 (1/8 mile) stock cam and spray
8.6 @ 84 (1/8 mile) cam and heads no spray
Our YOUTUBE CHANNEL featuring the Silverado
I am having he same issue, I cant flash my LLY, I have to use the V8 software to download, I get a bootloader error. This never happened till I updated to build 211. Is this something you will be fixing in the next build release?
Can you please see the section titled "Further Support" on this page:
http://support.efilive.com/kb_articl...8254-QOGC-9586
Send the trace files of the failed LS1B read, to me at paul@efilive.com, thanks
Regards
Paul
Before asking for help, please read this.
For anyone experiencing read/flash issues.
Please make sure you have the latest V8 software installed - which includes the latest firmware for your FlashScan device.
Once you have that software installed, click on the [Check Firmware] button to check (and update) the firmware on your FlashScan device.
You must have software: V8.2.1 build 203 as shown in the image below.
You must have firmware: V2.07.35 as shown in the image below.
Regards
Paul
Before asking for help, please read this.
Thanks, i put the latest version on and it works now!!!
I still have build 170 on the V8 and 180 on the 7.5. Is there anything special I should do to update?
See post #4 here (read the pdf very carefully and only proceed when understood): Can-I-view-misfire-counts